On Sun, 21 Apr 2002 03:29:32 -0400, Clarence Verge wrote:
> Sams, if I may interject at this point ? > I did NOT let the .APM install itself as it is against my religion. > I took it apart and tried the SSHDOS.exe by itself. I rather like the APM's, when they work. But I guess there are too many variables for them to work all the time. Of course an automatic process like a wizard or APM keeps me ignorant which might be a bigger problem in the long run than learning how to set things up myself. >> Maybe there is something wrong with your WATTCP.CFG > Possibly, because if I recall correctly I had to DELETE WATTCP.cfg to > get SSHDOS to work. I just checked my HD and I do NOT have that file. > I use both TELNET and SSHDOS and I have only a CONFIG.tel. > I have no "path.cfg" and I use Telnet and SSHDOS with both a dial-up > connection (using EITHER EPPPD or LSPPP) and also with a pre-established > network connection using BOOTP. > I hope this is useful to someone. Always glad to get your input, Clarence. I'm using LSPPP thanks to the help I got from you and Glenn some time ago. I also have no "path.cfg" but I do have a WATTCP.CFG. Let's see about a CONFIG.tel. I don't remember anything with that extension. clock=24 myname=arachne hardware=packet ioaddr=0x60 noarpme=yes video=auto visbell=no bios=no tek=no ftp=yes rcp=no passfile="nul" include="nul" capfile="prn,b" domaintime=4 domainretry=4 name=default #------if you cannot use BOOTP, try to uncomment and fill following settings: #---fill your IP address here #myip=0.0.0.0 #---fill your nameserver here #host=0.0.0.0 #---uncomment this to turn on nameserver #nameserver=1 #---------------------------------------------------------------------------- vtmargin=yes erase=delete clearsave=yes scrollback=50 nfcolor=white nbcolor=black rfcolor=black rbcolor=white ufcolor=green ubcolor=black retrans=1 mtu=1500 maxseg=4096 rwin=4096 contime=10 flags=0 Well, there it is. What do I need to change? I see I have to turn on the nameserver at least. (I think) But what else? Sam Ewalt Croswell, Michigan, USA -- Arachne V1.70;rev.3, NON-COMMERCIAL copy, http://arachne.cz/
