On Sun, 21 Apr 2002 06:29:11 -0500, Sam Ewalt wrote: > clock=24 > myname=arachne > hardware=packet > ioaddr=0x60 > noarpme=yes > video=auto > visbell=no > bios=no > tek=no > ftp=yes > rcp=no > passfile="nul" > include="nul" > capfile="prn,b" > domaintime=4 > domainretry=4 > name=default > #------if you cannot use BOOTP, try to uncomment and fill following settings: > #---fill your IP address here > #myip=0.0.0.0 > #---fill your nameserver here > #host=0.0.0.0 > #---uncomment this to turn on nameserver > #nameserver=1 > #---------------------------------------------------------------------------- > vtmargin=yes > erase=delete > clearsave=yes > scrollback=50 > nfcolor=white > nbcolor=black > rfcolor=black > rbcolor=white > ufcolor=green > ubcolor=black > retrans=1 > mtu=1500 > maxseg=4096 > rwin=4096 > contime=10 > flags=0
> Well, there it is. What do I need to change? > I see I have to turn on the nameserver at least. (I think) But what > else? Ah, that is EXACTLY the same as mine on this box and my Telnet works here. So, I'm using the default condition here. I had a problem with it using BOOTP on my DSL connection tho, and made some changes in that commented section. They are 40 miles away right now so I can't be any more specific other than saying I think it applies to BOOTP only. ;-) - Clarence Verge - Back to using Arachne V1.62 ....
