On Sun, 12 May 2002 10:14:53 -0400, [EMAIL PROTECTED] (howard schwartz) wrote:
> Specifically, I use Pine 3.91 for Dos to access my IMAP mail server. > With LSPPP, reliably, when I try to mail out a message with Pine, > the message gets mailed, then pine says, ``Writing Fcc'' -- and > freezes the computer virtually every time, requiring a reboot. In > fact, the Fcc copy gets written. With pine and the same message, using > epppd, pine has no trouble writting the Fcc after mailing out the > message. Maybe there is a problem with the memory area where LSPPP loads or else some vector conflict. I use LSPPP without problem, but I'm not using Pine. My suggestion(s): Disable logging with LSPPP so they both don't try to write the disk at the same time. If you load LSPPP high, try it low (or the reverse). Change the IRQ vector - you may have to try several. Try 64 and 65. I found I have stuff vectored at 61 I didn't know about. :( If you have Qemm you can use Manifest (MFT) to view the current interrupt vector usage. (First meg | interrupts | F3 to view by number) - Clarence Verge - Back to using Arachne V1.62 ....
