Hi Glenn,
I made several trials. The first ones went wrong but if I
'un-yellow' the new written line the template is clean an can hold a new
line.
However there is a small drawback: to un-yellow I have to go to the end
of the line and give an ENTER and that moves the written line and
produces a blank line in between.
Of course that blank line can undone... 3 key strokes to clear the
template. Is there an easier way?
BTW: Still using 1.61. I made so many changes and personal adaptions ;-)
Followed your advise and looked at http://www.xms.ms and indeed no
problems with Arachne.
Sent my neigbours an e-mail about it and now it is up to them.
Regards, Bastiaan
On Sun, 09 Mar 2003 15:28:15 -0500, Glenn McCorkle wrote:
> On Sat, 08 Mar 2003 13:44:57 +00, Bastiaan Edelman, PA3FFZ wrote:
>> Hi List,
>> in aranging address lists I stumbled.
>> First address added to the list by ^C = copy to clip board
>> ^V = paste to new list
>> This is OK... but with a second address ^C to clip board and again ^V
>> to paste. Now the first address is still on the clip board and pasted
>> to the new list.
>> How to remove the first address from the clip board to make room for the
>> second address ?
> OK, Let's try to track this down.
> Exactly where were both the 1st and 2nd times that you pressed ^C and ^V ?
> //NQ!
> --
> Glenn
> http://arachne.cz/
> http://www.delorie.com/listserv/mime/
> http://www.cisnet.com/glennmcc/
