On Sat, 12 Jul 2003 15:08:29 +00, Bastiaan Edelman, PA3FFZ wrote: > On Fri, 11 Jul 2003 21:05:30 -0400, Glenn McCorkle wrote:
>> Please describe some further details of what *does* happen when >> the unsuccessful attempt to connect is made. >> Have you tried PAP/CHAP login ? >> (no login script, no terminal login, username and password stored >> at the bottom of the [dialer] section in arachne.cfg) >> [dialer] >> DialPage file:pppglenn.htm >> Dialer @MINITERM.EXE>PPP.LOG >> TerminalWindow @MINITERM.EXE >> UseTerminal No >> Port 1 >> Irq 4 >> Base 0x3e8 >> Mode 8N1 >> Speed 115200 >> InitString AT&fs7=90s11=50 >> DialString ATDT >> PhoneNumber the_correct_dial-up_number >> Autologin No >> WaitFor1 >> Response1 >> WaitFor2 >> Response2 >> WaitFor3 >> Response3 >> PPPusername correct_username (might need something like [EMAIL PROTECTED]) >> PPPpassword correct_password (passwords are CaseSensitive) > *********************************************************************** > Hallo Glenn, > this is the last dialer page that actually worked OK. > I tried several for "wait for" but not even a ":" did the job. > If you don't now what the server is asking... > It all end with "NO CARRIER" > [dialer] > DialPage file:pppglenn.htm > Dialer @MINITERM.EXE>PPP.LOG > TerminalWindow @MINITERM.EXE > UseTerminal Yes > Port 2 > Irq 3 > Base Default > Mode 8N1 > Speed 38400 > InitString ATZ > DialString ATDT > PhoneNumber 0w0676034583 > Autologin Yes > WaitFor1 ogin: > Response1 /u > WaitFor2 ssword: > Response2 /p > ;WaitFor3 > ;Response3 - > ;WaitFor4 - > ;Response4 - > PPPusername [EMAIL PROTECTED] > PPPpassword ************ (I starred out their password) Please try as requested above...... Have you tried PAP/CHAP login ? (no login script, no terminal login, username and password stored at the bottom of the [dialer] section in arachne.cfg) To try PAP/CHAP.... simply change these 2 settings. (can be done on the dialer page 'ppp_init.htm' or 'pppglenn.htm') Since you *are* using pppglenn.htm: Notice what I placed there ? ;-) "show terminal (diagnostic mode)" "login script (most times not needed)" So...... Uncheck the box for 'show terminal', uncheck the box for 'login script', hit the 'save changes' button, hit the 'dial now' button. Sit-back and wait. ;-) -- Glenn http://arachne.cz/ http://www.delorie.com/listserv/mime/ http://www.cisnet.com/glennmcc/ http://www.cisnet.com/glennmcc/aqc/
