Date: Monday, January 21, 2013 @ 21:29:36 Author: thomas Revision: 175790
upgpkg: wpa_supplicant 2.0-1 Modified: wpa_supplicant/trunk/PKGBUILD wpa_supplicant/trunk/config ----------+ PKGBUILD | 15 ++++--------- config | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 64 insertions(+), 18 deletions(-) Modified: PKGBUILD =================================================================== --- PKGBUILD 2013-01-21 20:13:31 UTC (rev 175789) +++ PKGBUILD 2013-01-21 20:29:36 UTC (rev 175790) @@ -2,8 +2,8 @@ # Maintainer: Thomas Bächler <[email protected]> pkgname=wpa_supplicant -pkgver=1.0 -pkgrel=2 +pkgver=2.0 +pkgrel=1 pkgdesc="A utility providing key negotiation for WPA wireless networks" url="http://hostap.epitest.fi/wpa_supplicant"; arch=('i686' 'x86_64') @@ -12,17 +12,12 @@ license=('GPL') backup=('etc/wpa_supplicant/wpa_supplicant.conf') source=("http://w1.fi/releases/${pkgname}-${pkgver}.tar.gz"; - config hostap_allow-linking-with-libnl-3.2.patch) -md5sums=('8650f6aa23646ef634402552d0669640' - 'c035e45e8e240239eecd7402f235fb3b' - '473fb6b77909ec5a50b6f4d91370e86b') + config) +md5sums=('3be2ebfdcced52e00eda0afe2889839d' + '4aa1e5accd604091341b989b47fe1076') build() { cd "${srcdir}/${pkgname}-${pkgver}/" - - # from fedora - patch -Np1 -i "$srcdir/hostap_allow-linking-with-libnl-3.2.patch" - cd "${pkgname}" cp "${srcdir}/config" ./.config Modified: config =================================================================== --- config 2013-01-21 20:13:31 UTC (rev 175789) +++ config 2013-01-21 20:29:36 UTC (rev 175790) @@ -204,6 +204,8 @@ # Disable credentials for an open network by default when acting as a WPS # registrar. #CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +CONFIG_WPS_NFC=y # EAP-IKEv2 #CONFIG_EAP_IKEV2=y @@ -220,6 +222,9 @@ # Enable this if EAP-SIM or EAP-AKA is included #CONFIG_PCSC=y +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +CONFIG_HT_OVERRIDES=y + # Development testing #CONFIG_EAPOL_TEST=y @@ -227,6 +232,7 @@ # unix = UNIX domain sockets (default for Linux/*BSD) # udp = UDP sockets using localhost (127.0.0.1) # named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) # y = use default (backwards compatibility) # If this option is commented out, control interface is not included in the # build. @@ -303,6 +309,9 @@ # eloop_none = Empty template #CONFIG_ELOOP=eloop +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + # Select layer 2 packet implementation # linux = Linux packet socket (default) # pcap = libpcap/libdnet/WinPcap @@ -315,9 +324,7 @@ # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. +# IEEE 802.11w (management frame protection), also known as PMF # Driver support is also needed for IEEE 802.11w. #CONFIG_IEEE80211W=y @@ -335,6 +342,13 @@ # sent prior to negotiating which version will be used) #CONFIG_TLSV11=y +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +#CONFIG_TLSV12=y + # If CONFIG_TLS=internal is used, additional library and include paths are # needed for LibTomMath. Alternatively, an integrated, minimal version of # LibTomMath can be used. See beginning of libtommath.c for details on benefits @@ -400,6 +414,12 @@ # Set syslog facility for debug messages #CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + # Enable privilege separation (see README 'Privilege separation' for details) #CONFIG_PRIVSEP=y @@ -459,22 +479,53 @@ # IEEE 802.11n (High Throughput) support (mainly for AP mode) #CONFIG_IEEE80211N=y +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + # Interworking (IEEE 802.11u) # This can be used to enable functionality to improve interworking with # external networks (GAS/ANQP to learn more about the networks and network # selection based on available credentials). #CONFIG_INTERWORKING=y -CONFIG_LIBNL32=y +# Hotspot 2.0 +#CONFIG_HS20=y -# More options that are not in defconfig: - -# Lightweight AP mode +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. CONFIG_AP=y -# P2P (WiFi Direct) +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. CONFIG_P2P=y +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +CONFIG_LIBNL32=y + +# More options that are not in defconfig: + # RSN IBSS/AdHoc support CONFIG_IBSS_RSN=y
