Date: Friday, February 1, 2013 @ 13:30:25
Author: tpowa
Revision: 176846
archrelease: copy trunk to testing-any
Added:
hwdetect/repos/testing-any/
hwdetect/repos/testing-any/PKGBUILD
(from rev 176845, hwdetect/trunk/PKGBUILD)
hwdetect/repos/testing-any/hwdetect
(from rev 176845, hwdetect/trunk/hwdetect)
----------+
PKGBUILD | 19 ++
hwdetect | 500 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 519 insertions(+)
Copied: hwdetect/repos/testing-any/PKGBUILD (from rev 176845,
hwdetect/trunk/PKGBUILD)
===================================================================
--- testing-any/PKGBUILD (rev 0)
+++ testing-any/PKGBUILD 2013-02-01 12:30:25 UTC (rev 176846)
@@ -0,0 +1,19 @@
+# $Id$
+# Maintainer: Tobias Powalowski <[email protected]>
+pkgname=hwdetect
+pkgver=2013.02
+pkgrel=1
+pkgdesc="Hardware detection script with loading modules and mkinitcpio.conf /
rc.conf support"
+arch=(any)
+license=('GPL')
+depends=('sh' 'awk' 'grep' 'coreutils' 'sed' 'e2fsprogs')
+optdepends=('cryptsetup: for encrypt mkinitcpio config support'
+ 'dmraid: for dmraid mkinitcpio config support'
+ 'lvm2: for lvm2 mkinitcpio config support'
+ 'mdadm: for raid mkinitcpio config support')
+source=(hwdetect)
+
+build() {
+ install -D -m 755 ${srcdir}/hwdetect ${pkgdir}/sbin/hwdetect
+}
+md5sums=('894a3f1d481179651af00278f7638084')
Copied: hwdetect/repos/testing-any/hwdetect (from rev 176845,
hwdetect/trunk/hwdetect)
===================================================================
--- testing-any/hwdetect (rev 0)
+++ testing-any/hwdetect 2013-02-01 12:30:25 UTC (rev 176846)
@@ -0,0 +1,500 @@
+#! /bin/sh
+# Autodetection script for scanning /sys for hardware
+# for Archlinux by Tobias Powalowski <[email protected]>
+# '--modules-not-loaded' patch by Grzegorz Wierzowiecki
<grzegorz.wierzowiecki_4t_pjwstk.edu.pl>
+usage () {
+ echo "$0 [options]"
+ echo ""
+ echo " This is a tool that detects/lists modules that are exported by
/sys"
+ echo ""
+ echo " Options:"
+ echo " --kernel_version= use kernel version (no autodetect)"
+ echo " --kernel_directory= use kernel module directory (no
autodetect)"
+ echo " --load-modules load all detected modules"
+ echo " --unload-modules unload all detected modules"
+ echo " --show-modules show all detected modules"
+ echo " --show-modules-order shows load order of detected modules"
+ echo " --show-agp show AGP modules"
+ echo " --show-acpi show ACPI modules"
+ echo " --show-block show BLOCK DEVICE modules"
+ echo " --show-net show NETWORK modules"
+ echo " --show-drm show DRM modules"
+ echo " --show-input show INPUT modules"
+ echo " --show-irda show IRDA modules"
+ echo " --show-isdn show ISDN modules"
+ echo " --show-pcmcia show PCMCIA modules"
+ echo " --show-sound show SOUND modules"
+ echo " --show-staging show STAGING modules"
+ echo " --show-other show OTHER modules"
+ echo " --modules show all detected MODULES"
+ echo " --modules-not-loaded show all detected MODULES but not
actually loaded"
+ echo ""
+ echo " For /etc/mkinitcpio.conf use:"
+ echo " --filesystem add filesystems to MODULES="
+ echo " --hostcontroller show MODULES= for all hostcontrollers"
+ echo " --ati-kms add ati kernel mode setting"
+ echo " --intel-kms add intel kernel mode setting"
+ echo " --nvidia-kms add nvidia kernel mode setting"
+ echo ""
+ echo " --rootdevice= autodetected advanced features of
rootdevice"
+ echo " --hooks-dir= use this directory for HOOKS check"
+ echo " --advanced show autodetected advanced HOOKS"
+ echo " --hooks show HOOKS="
+ echo " --dmraid add dmraid to HOOKS="
+ echo " --keymap add keymap to HOOKS="
+ echo " --pcmcia add pcmcia to HOOKS="
+ echo " --nfs add net to HOOKS="
+ echo " --btrfs add btrfs to HOOKS="
+ echo " --shutdown add shutdown to HOOKS="
+ exit 1
+}
+
+[ "$1" = "" ] && usage
+[ "$1" = "--help" ] && usage
+[ "$1" = "-h" ] && usage
+
+# setting parameters
+PARAMETER="$(echo $*)"
+parameter() {
+ while [ -n "$1" ]; do
+ case $1 in
+ --kernel_directory=*)
+ KERNEL_DIRECTORY="$(echo $1 | awk -F= '{print $2;}')"
+ ;;
+ --kernel_version=*)
+ KERNEL_VERSION="$(echo $1 | awk -F= '{print $2;}')"
+ ;;
+ --rootdevice=*)
+ ROOTDEVICE="$(echo $1 | awk -F= '{print $2;}')"
+ ;;
+ -hooks-dir=*|--hooks-dir=*)
+ HOOKS_DIR="$(echo $1 | awk -F= '{print $2;}')"
+ ;;
+ esac
+ shift
+ done
+}
+
+parameter $PARAMETER
+
+if [ "$KERNEL_VERSION" = "" ]; then
+ KERNEL_VERSION="$(uname -r)"
+fi
+
+# uvesafb switch
+[ "$(echo $* | grep '\-uvesafb')" ] && UVESAFB=1
+
+# dmraid switch
+[ "$(echo $* | grep '\-dmraid')" ] && DMRAID=1
+
+# keymap switch
+[ "$(echo $* | grep '\-keymap')" ] && KEYMAP=1
+
+# pcmcia switch
+[ "$(echo $* | grep '\-pcmcia')" ] && PCMCIA=1
+
+# nfs switch
+[ "$(echo $* | grep '\-nfs')" ] && NFS=1
+
+# btrfs switch
+[ "$(echo $* | grep '\-btrfs')" ] && BTRFS=1
+
+# shutdown switch
+[ "$(echo $* | grep '\-shutdown')" ] && SHUTDOWN=1
+
+# hooks switch
+[ "$(echo $* | grep '\-hooks')" ] && HOOKS=1
+
+ADVANCED=""
+# root device check
+if ! [ "$ROOTDEVICE" = "" ]; then
+ # check device mapper devices
+ if [ "$(echo "$ROOTDEVICE" | grep "/dev/mapper")" ]; then
+ # check if encryption is used
+ if [ "$(cryptsetup status $ROOTDEVICE 2>/dev/null)" ]; then
+ ADVANCED="encrypt"
+ # check on lvm
+ realdevice="$(cryptsetup status $ROOTDEVICE 2>/dev/null
| grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
+ if [ "$(lvs $realdevice 2>/dev/null)" ]; then
+ ADVANCED="lvm2 encrypt"
+ vg="$(echo $(lvs -o vg_name --noheading
$realdevice))"
+ # check on raid
+ [ "$(pvs -o pv_name,vg_name --noheading | grep
"$vg$" | grep "/dev/md")" ] && ADVANCED="mdadm lvm2 encrypt"
+ fi
+ # check on raid
+ if [ "$(cryptsetup status $ROOTDEVICE 2>/dev/null |
grep "device:.*/dev/md" | sed -e 's#.*\ ##g')" ]; then
+ ADVANCED="mdadm encrypt"
+ realdevice="$(cryptsetup status $ROOTDEVICE
2>/dev/null | grep "device:.*/dev/md" | sed -e 's#.*\ ##g')"
+ # check on lvm
+ [ "$(mdadm --detail $realdevice | grep
"/dev/dm-")" ] && ADVANCED="lvm2 mdadm encrypt"
+ fi
+ fi
+ # check if lvm is used
+ if [ "$(lvs $ROOTDEVICE 2>/dev/null)" ]; then
+ ADVANCED="lvm2"
+ vg="$(echo $(lvs -o vg_name --noheading $ROOTDEVICE))"
+ # check on encrypt
+ if [ "$(pvs -o pv_name,vg_name --noheading | grep
"$vg$" | grep "/dev/dm-")" ]; then
+ ADVANCED="encrypt lvm2"
+ # check on raid
+ [ "$(pvs -o pv_name,vg_name --noheading | grep
"$vg$" | grep "/dev/md")" ] && ADVANCED="mdadm encrypt lvm2"
+ for i in "$(pvs -o pv_name,vg_name --noheading
| grep "$vg$" | grep "/dev/dm-")"; do
+ realdevice="$(echo $i | cut -d ' ' -f1)"
+ #getsymlink="$(readlink $realdevice)"
+ #correctdevice="$(echo $getsymlink |
sed -e 's#\.\.#/dev#g')"
+ [ "$(cryptsetup status $realdevice
2>/dev/null | grep "device:.*/dev/md")" ] && ADVANCED="mdadm encrypt lvm2"
+ done
+ fi
+ # check on raid
+ if [ "$(pvs -o pv_name,vg_name --noheading | grep
"$vg$" | grep "/dev/md")" ]; then
+ ADVANCED="mdadm lvm2"
+ #check on encrypt
+ [ "$(pvs -o pv_name,vg_name --noheading | grep
"$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt mdadm lvm2"
+ for i in "$(pvs -o pv_name,vg_name --noheading
| grep "$vg$" | grep "/dev/md")"; do
+ realdevice="$(echo $i | cut -d ' ' -f1)"
+ [ "$(mdadm --detail $realdevice | grep
"/dev/dm-")" ] && ADVANCED="encrypt mdadm lvm2"
+ done
+ fi
+ fi
+ fi
+ # check md device
+ if [ "$(echo "$ROOTDEVICE" | grep "/dev/md")" ]; then
+ ADVANCED="mdadm"
+ # raid partitions or raid?
+ if [ "$(echo "$ROOTDEVICE" | grep "/dev/md*p")" ]; then
+ realdevice="$(echo $ROOTDEVICE | sed -e 's#p.*##g' -e
's#/dev/##g')"
+ if ! [ "$(find /sys/block/$realdevice/slaves/ -name
'dm*' 2>/dev/null)" = "" ]; then
+ SET_LVM=""
+ SET_ENCRYPT=""
+ for k in $(find /sys/block/$realdevice/slaves/
-name 'dm*' 2>/dev/null); do
+ [ "$(lvs /dev/mapper/$(cat $k/dm/name)
2>/dev/null)" ] && SET_LVM="1"
+ [ "$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null)" ] && SET_ENCRYPT="1"
+ # check on lvm
+ [ "$(lvs /dev/mapper/$(cat $k/dm/name)
2>/dev/null)" ] && ADVANCED="lvm2 mdadm"
+ # check on encrypt
+ [ "$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null)" ] && ADVANCED="encrypt mdadm"
+ # check encrypted volume device
+ realdevice="$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null | grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
+ [ "$(lvs $realdevice 2>/dev/null)" ] &&
ADVANCED="lvm2 encrypt mdadm"
+ vg="$(echo $(lvs -o vg_name --noheading
/dev/mapper/$(cat $k/dm/name) 2>/dev/null))"
+ [ "$(pvs -o pv_name,vg_name --noheading
| grep "$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt lvm2 mdadm"
+ done
+ [ "$SET_LVM" = "1" -a "$SET_ENCRYPT" = "1" ] &&
ADVANCED="lvm2 encrypt mdadm"
+ fi
+ else
+ realdevice="$(echo $ROOTDEVICE | sed -e 's#/dev/##g')"
+ if ! [ "$(find /sys/block/$realdevice/slaves/ -name
'dm*' 2>/dev/null)" = "" ]; then
+ SET_LVM=""
+ SET_ENCRYPT=""
+ for k in $(find /sys/block/$realdevice/slaves/
-name 'dm*' 2>/dev/null); do
+ [ "$(lvs /dev/mapper/$(cat $k/dm/name)
2>/dev/null)" ] && SET_LVM="1"
+ [ "$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null)" ] && SET_ENCRYPT="1"
+ # check on lvm
+ [ "$(lvs /dev/mapper/$(cat $k/dm/name)
2>/dev/null)" ] && ADVANCED="lvm2 mdadm"
+ # check on encrypt
+ [ "$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null)" ] && ADVANCED="encrypt mdadm"
+ # check encrypted volume device
+ realdevice="$(cryptsetup status $(cat
$k/dm/name) 2>/dev/null | grep "device:.*/dev/mapper/" | sed -e 's#.*\ ##g')"
+ [ "$(lvs $realdevice 2>/dev/null)" ] &&
ADVANCED="lvm2 encrypt mdadm"
+ vg="$(echo $(lvs -o vg_name --noheading
/dev/mapper/$(cat $k/dm/name) 2>/dev/null))"
+ [ "$(pvs -o pv_name,vg_name --noheading
| grep "$vg$" | grep "/dev/dm-")" ] && ADVANCED="encrypt lvm2 mdadm"
+ done
+ [ "$SET_LVM" = "1" -a "$SET_ENCRYPT" = "1" ] &&
ADVANCED="lvm2 encrypt mdadm"
+ fi
+ fi
+ fi
+fi
+
+: >/tmp/modules-plain
+: >/tmp/modules-stripped
+: >/tmp/modules-sorted
+: >/tmp/moduleslist
+: >/tmp/.blkid
+
+# generate blkid
+blkid -c /dev/null -s TYPE > /tmp/.blkid
+
+# find pci aliases
+aliases=$(find /sys/ -noleaf -name modalias -exec cat {} +)
+
+# generate files for the different actions
+modprobe -i -a --dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION
--show-depends $aliases >> /tmp/modules-plain 2>/dev/null
+
+# find PNP devices like parports, soundcards etc.
+# (workaround for rtc, pcspkr, irtty-sir and analog are included)
+if [ "$(find /sys/devices -noleaf -name 'id' | grep /pnp)" ]; then
+ for i in $(find /sys/devices -noleaf -name "id" | grep /pnp); do
+ devid=$(cat $i | grep PNP)
+ [ "$devid" ] || continue
+
+ modprobe -i --set-version=$KERNEL_VERSION --show-depends
pnp:d${devid} >> /tmp/modules-plain 2>/dev/null
+ [ "$devid" = "PNP0800" ] && modprobe -i
--dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION --show-depends pcspkr
>> /tmp/modules-plain 2>/dev/null
+ [ "$devid" = "PNP0510" ] && modprobe -i
--dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION --show-depends
irtty-sir >> /tmp/modules-plain 2>/dev/null
+ [ "$devid" = "PNP0511" ] && modprobe -i
--dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION --show-depends
irtty-sir >> /tmp/modules-plain 2>/dev/null
+ [ "$devid" = "PNPb02f" ] && modprobe -i
--dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION --show-depends analog
>> /tmp/modules-plain 2>/dev/null
+
+ # load ppp-generic if serial ports are detected for modems
+ [ "$devid" = "PNP0501" ] && modprobe -i
--dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION --show-depends
ppp-generic >> /tmp/modules-plain 2>/dev/null
+ done
+fi
+
+# SCSI disks/cdroms/tapes/generic devices
+if [ "$(find /sys/devices -noleaf -name 'type')" ]; then
+ for i in $(cat $(find /sys/devices -noleaf -name "type")); do
+ case $i in (4|5) modprobe -i --dirname=$KERNEL_DIRECTORY
--set-version=$KERNEL_VERSION --show-depends sr_mod >> /tmp/modules-plain
2>/dev/null ;; esac
+ case $i in (2|3|6|8|9) modprobe -i --dirname=$KERNEL_DIRECTORY
--set-version=$KERNEL_VERSION --show-depends sg >> /tmp/modules-plain
2>/dev/null ;; esac
+ case $i in (0|7|14) modprobe -i --dirname=$KERNEL_DIRECTORY
--set-version=$KERNEL_VERSION --show-depends sd_mod >> /tmp/modules-plain
2>/dev/null ;; esac
+ case $i in (1) modprobe -i --dirname=$KERNEL_DIRECTORY
--set-version=$KERNEL_VERSION --show-depends st >> /tmp/modules-plain
2>/dev/null ;; esac
+ done
+fi
+
+# add Buslogic for vmware
+if [ "$VMWARE" = "1" ]; then
+ modprobe -i --dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION
--show-depends BusLogic >> /tmp/modules-plain 2>/dev/null
+fi
+
+# Parport modules
+if [ "$(grep 'parport' /tmp/modules-plain)" ]; then
+ modprobe -i --dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION
--show-depends lp >> /tmp/modules-plain 2>/dev/null
+ modprobe -i --dirname=$KERNEL_DIRECTORY --set-version=$KERNEL_VERSION
--show-depends ppdev >> /tmp/modules-plain 2>/dev/null
+fi
+
+sort -u /tmp/modules-plain >> /tmp/modules-stripped
+
+# OTHER modules loading first for speed up!
+grep -v "scsi/" /tmp/modules-stripped | grep -v "fusion/" | grep -v
"block/sx8" | grep -v "message/fusion" | \
+ grep -v "block/cciss" | grep -v "block/cpqarray" | grep -v
"block/DAC960" | grep -v "block/virtio" | grep -v "ata/" | \
+ grep -v "net/" | grep -v "pcmcia/" | grep -v "usb/" | \
+ grep -v "firewire" | grep -v "ieee1394/" | grep -v "usbhid/" | grep -v
"staging/" | grep -v "wireless/" | grep -v "virtio_pci" >> /tmp/modules-sorted
+# load virtio first!
+grep "virtio_pci" /tmp/modules-stripped >> /tmp/modules-sorted
+# make a correct order for the modules, internal devices have priority!
+grep "ata/pata" /tmp/modules-stripped | grep -v "pata_acpi" >>
/tmp/modules-sorted
+grep "scsi/" /tmp/modules-stripped | grep -v "sd_mod" | grep -v "sr_mod" |
grep -v "/sg.ko" | grep -v "/st.ko" >> /tmp/modules-sorted
+grep "block/" /tmp/modules-stripped | grep -v "virtio_blk" | grep -v "sx8" |
grep -v "nbd" | grep -v "pktcdvd" | grep -v "floppy" >> /tmp/modules-sorted
+grep "fusion/" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "ata/" /tmp/modules-stripped| grep -v "pata" | grep -v "ata_generic" |
grep -v "libata" >> /tmp/modules-sorted
+grep "block/" /tmp/modules-stripped | grep "sx8" >> /tmp/modules-sorted
+grep "net/" /tmp/modules-stripped | grep -v "wireless/" | grep -v "usb/" >>
/tmp/modules-sorted
+grep "wireless/" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "staging/" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "pcmcia/" /tmp/modules-stripped >> /tmp/modules-sorted
+
+# speed up usb module loading
+grep "usb-storage" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "usblp" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "usbhid" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "usb/" /tmp/modules-stripped | grep -v "usb-storage" | grep -v "usbhid" |
grep -v "usblp" >> /tmp/modules-sorted
+grep "firewire/" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "ieee1394/" /tmp/modules-stripped >> /tmp/modules-sorted
+
+# add scsi and virtio device modules at the end
+grep "virtio_blk" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "sd_mod" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "sr_mod" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "/st.ko" /tmp/modules-stripped >> /tmp/modules-sorted
+grep "/sg.ko" /tmp/modules-stripped >> /tmp/modules-sorted
+
+
+sed -ne "s#^insmod.*/\(.*\)\.ko.*#\1#p" /tmp/modules-sorted >> /tmp/moduleslist
+
+listmods() {
+ key=$1 ; shift
+ ex=
+ while [ "$1" ]; do
+ [ "$ex" ] && ex="$ex|$1" || ex="$1"
+ shift
+ done
+ for ln in $(grep "$key" /tmp/modules-sorted | sed 's|^insmod ||g'); do
+ if [ "$ex" ]; then
+ echo $ln | egrep -v "$ex" | sed -ne
"s#^/.*/\(.*\)\.ko.*#\1#p"
+ else
+ echo $ln | sed -ne "s#^/.*/\(.*\)\.ko.*#\1#p"
+ fi
+ done
+}
+showlist() {
+ cat=$1 ; shift
+ [ $# -gt 0 ] || return
+ echo -n "$cat: "
+ for i in $*; do echo -n "$i "; done
+ echo ""
+}
+
+showlist2() {
+ cat=$1 ; shift
+ [ $# -gt 0 ] || return
+ echo -n "$cat="
+ for i in $*; do echo -n "$i "; done
+ echo ""
+}
+
+showlist3() {
+ cat=$1 ; shift
+ [ $# -gt 0 ] || return
+ for i in $*; do echo -n "$i "; done
+ echo ""
+}
+
+showlist4() {
+ cat=$1 ; shift
+ [ $# -gt 0 ] || return
+ echo -n "$cat=(\${MODULES[*]} "
+ lsmod > /tmp/modules-showlist4-$$
+ for i in $*; do
+ if ! grep -sq $(echo $i|tr - _) /tmp/modules-showlist4-$$ ; then
+ echo -n "$i ";
+ fi
+ done
+ echo ")"
+ rm /tmp/modules-showlist4-$$
+}
+
+# starting different actions
+while [ -n "$*" ]; do
+ case $1 in
+ --load-modules)
+ # load all detected pci modules
+ for i in $(cat /tmp/moduleslist); do
+ modprobe $i > /dev/null 2>&1
+ done
+ ;;
+
+ --unload-modules)
+ # load all detected pci modules
+ for i in $(cat /tmp/moduleslist); do
+ modprobe -r $i > /dev/null 2>&1
+ done
+ ;;
+
+ --show-modules)
+ showlist "AGP " $(listmods agp/)
+ showlist "ACPI " $(listmods acpi/)
+ showlist "BLOCK " $(listmods ata/pata pata_acpi)
$(listmods ata/ata_piix) \
+ $(listmods virtio/virtio_pci)
$(listmods scsi/) $(listmods message/fusion/) $(listmods drivers/block/ nbd
pktcdvd sx8 floppy) \
+ $(listmods ata/ pata
ata_generic) $(listmods drivers/block/sx8) \
+ $(listmods usb/ usb/input)
$(listmods firewire/) $(listmods ieee1394/)
+ showlist "NET " $(listmods net/ irda/)
+ showlist "DRM " $(listmods drm/)
+ showlist "INPUT " $(listmods input/ pcspkr) $(listmods
hid/)
+ showlist "IRDA " $(listmods irda/)
+ showlist "ISDN " $(listmods isdn/)
+ showlist "PCMCIA " $(listmods pcmcia/)
+ showlist "SOUND " $(listmods pcspkr) $(listmods sound/)
+ showlist "STAGING" $(listmods staging/)
+ showlist "OTHER " $(listmods modules/ agp/ acpi/ scsi/
message/fusion block/sx8 block/cciss block/cpqarray block/DAC960 block/virtio
virtio/virtio_pci ata/ usb/ ieee1394 net/ isdn/ input/ irda/ pcmcia/ sound/
drm/ firewire/ hid/ staging/)
+ ;;
+
+ --show-modules-order)
+ showlist "MODULES ORDER" $(listmods modules/)
+ ;;
+
+ --show-agp) showlist "AGP " $(listmods agp/) ;;
+ --show-acpi) showlist "ACPI " $(listmods acpi/) ;;
+ --show-block) showlist "BLOCK " $(listmods ata/pata
pata_acpi) $(listmods ata/ata_piix) \
+ $(listmods virtio/virtio_pci)
$(listmods scsi/) $(listmods message/fusion/) $(listmods drivers/block/ nbd
pktcdvd sx8 floppy) \
+ $(listmods ata/ pata
ata_generic) $(listmods drivers/block/sx8) \
+ $(listmods usb/ usb/input)
$(listmods firewire/) $(listmods ieee1394/) ;;
+ --show-net) showlist "NET " $(listmods net/ irda/) ;;
+ --show-input) showlist "INPUT " $(listmods input/ pcspkr)
$(listmods hid/) ;;
+ --show-irda) showlist "IRDA " $(listmods irda/) ;;
+ --show-isdn) showlist "ISDN " $(listmods isdn/) ;;
+ --show-pcmcia) showlist "PCMCIA " $(listmods pcmcia/) ;;
+ --show-sound) showlist "SOUND " $(listmods pcspkr) $(listmods
sound/) ;;
+ --show-staging) showlist "STAGING" $(listmods staging/) ;;
+ --show-drm) showlist "DRM " $(listmods drm/) ;;
+ --show-other) showlist "OTHER " $(listmods .ko agp/ acpi/
scsi/ message/fusion block/sx8 block/cciss block/cpqarray block/DAC960
block/virtio virtio/virtio_pci ata/ usb/ ieee1394 net/ isdn/ input/ irda/
pcmcia/ sound/ drm/ firewire/ hid/ staging/) ;;
+ --filesystem) FILESYSTEM="ext2 ext3 ext4 nilfs2 btrfs
reiserfs xfs jfs vfat"
+ for i in $FILESYSTEM; do
+ [ "$(grep $i /tmp/.blkid)" ] &&
FS="$FS $i"
+ done
+ [ "$(echo $FS | grep btrfs)" ] && FS="$FS
crc32c"
+ MODULES_INITRAMFS="$MODULES_INITRAMFS $FS"
+ showlist2 "MODULES" \"$MODULES_INITRAMFS\" |
sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --hostcontroller)HOSTCONTROLLER="$(listmods virtio/virtio_pci)
$(listmods ata/pata pata_acpi) $(listmods scsi/ /sg.ko /st.ko scsi_mod sr_mod
sd_mod) $(listmods message/fusion/) $(listmods drivers/block/ virtio_blk nbd
pktcdvd sx8 floppy) $(listmods ata/ pata ata_generic) $(listmods
drivers/block/sx8) $(listmods xhci-hcd) $(listmods ehci-hcd) $(listmods
uhci-hcd) $(listmods ohci-hcd) $(listmods virtio_blk)"
+ MODULES_INITRAMFS="$MODULES_INITRAMFS
$HOSTCONTROLLER"
+ showlist2 "MODULES" \"$MODULES_INITRAMFS\" |
sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --ati-kms) KMS="radeon"
+ MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
+ showlist2 "MODULES" \"$MODULES_INITRAMFS\" |
sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --intel-kms) KMS="i915"
+ MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
+ showlist2 "MODULES" \"$MODULES_INITRAMFS\" |
sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --nvidia-kms) KMS="nouveau"
+ MODULES_INITRAMFS="$KMS $MODULES_INITRAMFS"
+ showlist2 "MODULES" \"$MODULES_INITRAMFS\" |
sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --uvesafb) FB="uvesafb"
+ MODULES_INITRAMFS="$FB $MODULES_INITRAMFS"
+ ! [ "$HOOKS" = "1" ] && showlist2 "MODULES"
\"$MODULES_INITRAMFS\" | sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e
's/\ \ /\ /g'
+ ;;
+ --fbmodule) FB=""
+ for i in $(cat
/etc/modprobe.d/framebuffer_blacklist.conf); do
+ i=$(echo $i | sed -e 's/blacklist //g')
+ # check if already in FB array, to avoid
double entries
+ if [ "$(cat /proc/modules | grep ^$i)" ];
then
+ ! [ "$(grep -w $FB)" ] && FB="$i"
+ fi
+ done
+ MODULES_INITRAMFS="$FB $MODULES_INITRAMFS "
+ ! [ "$HOOKS" = "1" ] && showlist2 "MODULES"
\"$MODULES_INITRAMFS\" | sed -e 's/(\ /(/g' -e 's/"\ /"/g' -e 's/\ "/"/g' -e
's/\ \ /\ /g'
+ ;;
+ --modules) showlist2 "MODULES" \($(listmods modules/)\) | sed
-e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
+ ;;
+ --modules-not-loaded) showlist4 "MODULES" $(listmods modules/)
| sed -e 's/(\ /(/g' -e 's/\ )/)/g' -e 's/\ \ /\ /g'
+ ;;
+ --hooks)
+ if [ "$HOOKS_DIR" = "" ]; then
+ HOOKS_DIR="/usr/lib/initcpio/install"
+ fi
+ START_HOOKS="base v86d udev keymap autodetect modconf
block pcmcia net dmraid keyboard $ADVANCED btrfs filesystems fsck shutdown"
+ # remove the ones that don't exist on the system
+ for i in ${START_HOOKS}; do
+ if ! [ -e "${HOOKS_DIR}/$i" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed
-e "s/${i}\ //g")
+ fi
+ done
+ if ! [ "$KEYMAP" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/keymap//g")
+ fi
+ if ! [ "$UVESAFB" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/v86d//g")
+ fi
+ if ! [ "$DMRAID" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/dmraid//g")
+ fi
+ if ! [ "$PCMCIA" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/pcmcia//g")
+ fi
+ if ! [ "$NFS" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/net//g")
+ fi
+ if ! [ "$BTRFS" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/btrfs//g")
+ fi
+ if ! [ "$SHUTDOWN" = "1" ]; then
+ START_HOOKS=$(echo $START_HOOKS | sed -e
"s/shutdown//g")
+ fi
+ echo "HOOKS=\"$START_HOOKS\"" | sed -e 's/"\ /"/g' -e
's/\ "/"/g' -e 's/\ \ /\ /g'
+ ;;
+ --advanced) ADVANCED_ARCHBOOT=""
+ for i in $ADVANCED; do
+ ADVANCED_ARCHBOOT="$ADVANCED_ARCHBOOT $(echo
arch_$i)"
+ done
+ echo "$ADVANCED_ARCHBOOT"
+ ;;
+ esac
+ shift
+done
+
+# cleanup
+rm /tmp/modules-plain
+rm /tmp/modules-sorted
+rm /tmp/modules-stripped
+rm /tmp/moduleslist
+
+# vim: set ts=2 sw=2 noet:
