Date: Sunday, April 26, 2015 @ 13:53:27
Author: jlichtblau
Revision: 132260
archrelease: copy trunk to community-i686
Added:
syncthing/repos/community-i686/PKGBUILD
(from rev 132259, syncthing/trunk/PKGBUILD)
syncthing/repos/community-i686/syncthing.1
(from rev 132259, syncthing/trunk/syncthing.1)
syncthing/repos/community-i686/syncthing.install
(from rev 132259, syncthing/trunk/syncthing.install)
Deleted:
syncthing/repos/community-i686/PKGBUILD
syncthing/repos/community-i686/syncthing.1
syncthing/repos/community-i686/syncthing.install
-------------------+
PKGBUILD | 96 +++++++++++++-------------
syncthing.1 | 188 ++++++++++++++++++++++++++--------------------------
syncthing.install | 18 ++--
3 files changed, 151 insertions(+), 151 deletions(-)
Deleted: PKGBUILD
===================================================================
--- PKGBUILD 2015-04-26 11:42:23 UTC (rev 132259)
+++ PKGBUILD 2015-04-26 11:53:27 UTC (rev 132260)
@@ -1,48 +0,0 @@
-# $Id$
-# Maintainer : Martin Wimpress <[email protected]>
-# Maintainer : Jaroslav Lichtblau <[email protected]>
-# Contributor: Sauyon Lee <[email protected]>
-# Contributor: Kevin MacMartin <[email protected]>
-# Contributor: korjjj <[email protected]>
-
-pkgname=syncthing
-pkgver=0.10.30
-pkgrel=1
-pkgdesc="Open Source Continuous Replication / Cluster Synchronization Thing"
-url="http://syncthing.net/";
-license=('GPL3')
-arch=('i686' 'x86_64')
-depends=('glibc')
-makedepends=('git' 'go' 'godep' 'inetutils' 'sed')
-source=($pkgname-$pkgver::git+https://github.com/syncthing/syncthing.git#tag=v${pkgver}
- $pkgname.1)
-sha1sums=('SKIP'
- '17be8b3f99c577e325765abc251f597e204d7711')
-install=${pkgname}.install
-
-prepare() {
- cd "${srcdir}"
- mkdir -p "src/github.com/syncthing"
- mv "${pkgname}-${pkgver}" "src/github.com/syncthing/${pkgname}"
-}
-
-build() {
- export GOPATH="${srcdir}"
- cd "${srcdir}/src/github.com/syncthing/${pkgname}"
- go run build.go -no-upgrade build
-}
-
-check() {
- export GOPATH="${srcdir}"
- cd "${srcdir}/src/github.com/syncthing/${pkgname}"
- #go run build.go -no-upgrade test
-}
-
-package() {
- cd "${srcdir}/src/github.com/syncthing/${pkgname}"
- install -Dm755 ${pkgname} "${pkgdir}/usr/bin/${pkgname}"
- install -Dm644 README.md "${pkgdir}/usr/share/doc/${pkgname}/README.md"
- install -Dm644 "etc/linux-systemd/system/${pkgname}@.service"
"${pkgdir}/usr/lib/systemd/system/${pkgname}@.service"
- install -Dm644 "etc/linux-systemd/user/${pkgname}.service"
"${pkgdir}/usr/lib/systemd/user/${pkgname}.service"
- install -Dm644 "${srcdir}/${pkgname}.1"
"${pkgdir}/usr/share/man/man1/${pkgname}.1"
-}
Copied: syncthing/repos/community-i686/PKGBUILD (from rev 132259,
syncthing/trunk/PKGBUILD)
===================================================================
--- PKGBUILD (rev 0)
+++ PKGBUILD 2015-04-26 11:53:27 UTC (rev 132260)
@@ -0,0 +1,48 @@
+# $Id$
+# Maintainer : Martin Wimpress <[email protected]>
+# Maintainer : Jaroslav Lichtblau <[email protected]>
+# Contributor: Sauyon Lee <[email protected]>
+# Contributor: Kevin MacMartin <[email protected]>
+# Contributor: korjjj <[email protected]>
+
+pkgname=syncthing
+pkgver=0.10.31
+pkgrel=1
+pkgdesc="Open Source Continuous Replication / Cluster Synchronization Thing"
+url="http://syncthing.net/";
+license=('GPL3')
+arch=('i686' 'x86_64')
+depends=('glibc')
+makedepends=('git' 'go' 'godep' 'inetutils' 'sed')
+source=($pkgname-$pkgver::git+https://github.com/syncthing/syncthing.git#tag=v${pkgver}
+ $pkgname.1)
+sha1sums=('SKIP'
+ '17be8b3f99c577e325765abc251f597e204d7711')
+install=${pkgname}.install
+
+prepare() {
+ cd "${srcdir}"
+ mkdir -p "src/github.com/syncthing"
+ mv "${pkgname}-${pkgver}" "src/github.com/syncthing/${pkgname}"
+}
+
+build() {
+ export GOPATH="${srcdir}"
+ cd "${srcdir}/src/github.com/syncthing/${pkgname}"
+ go run build.go -no-upgrade build
+}
+
+check() {
+ export GOPATH="${srcdir}"
+ cd "${srcdir}/src/github.com/syncthing/${pkgname}"
+ #go run build.go -no-upgrade test
+}
+
+package() {
+ cd "${srcdir}/src/github.com/syncthing/${pkgname}"
+ install -Dm755 ${pkgname} "${pkgdir}/usr/bin/${pkgname}"
+ install -Dm644 README.md "${pkgdir}/usr/share/doc/${pkgname}/README.md"
+ install -Dm644 "etc/linux-systemd/system/${pkgname}@.service"
"${pkgdir}/usr/lib/systemd/system/${pkgname}@.service"
+ install -Dm644 "etc/linux-systemd/user/${pkgname}.service"
"${pkgdir}/usr/lib/systemd/user/${pkgname}.service"
+ install -Dm644 "${srcdir}/${pkgname}.1"
"${pkgdir}/usr/share/man/man1/${pkgname}.1"
+}
Deleted: syncthing.1
===================================================================
--- syncthing.1 2015-04-26 11:42:23 UTC (rev 132259)
+++ syncthing.1 2015-04-26 11:53:27 UTC (rev 132260)
@@ -1,94 +0,0 @@
-.\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
-.
-.TH "SYNCTHING" "" "May 2014" "" "syncthing"
-.
-.SH "Project Goals"
-This is the \fBsyncthing\fR project\. The following are the project goals:
-.
-.IP "1." 4
-Define a protocol for synchronization of a file repository between a number of
collaborating nodes\. The protocol should be well defined, unambiguous, easily
understood, free to use, efficient, secure and language neutral\. This is the
Block Exchange Protocol
\fIhttps://github\.com/calmh/syncthing/blob/master/protocol/PROTOCOL\.md\fR\.
-.
-.IP "2." 4
-Provide the reference implementation to demonstrate the usability of said
protocol\. This is the \fBsyncthing\fR utility\. It is the hope that
alternative, compatible implementations of the protocol will come to exist\.
-.
-.IP "" 0
-.
-.P
-The two are evolving together; the protocol is not to be considered stable
until syncthing 1\.0 is released, at which point it is locked down for
incompatible changes\.
-.
-.P
-Syncthing does not use the BitTorrent protocol\. The reasons for this are 1)
we don\'t know if BitTorrent Sync does either, so there\'s nothing to be
compatible with, 2) BitTorrent includes a lot of functionality for making sure
large swarms of selfish agents behave and somehow work towards a common goal\.
Here we have a much smaller swarm of cooperative agents and a simpler approach
will suffice\.
-.
-.SH "Systemd"
-The systemd services for Syncthing and its discovery server can be used to
start, stop, restart and enable them to run at boot\.
-.
-.SS "Syncthing"
-Syncthing is the main sync client and can be controlled using systemd using
the commands below\. Since Syncthing is run for a particular user, replace
\'username\' in the commands below with the name of the user you want it to run
it under\.
-.
-.IP "" 4
-.
-.nf
-
-Start Syncthing: systemctl start syncthing@username
-Stop Syncthing: systemctl stop syncthing@username
-Restart Syncthing: systemctl restart syncthing@username
-Enable Syncthing at Boot: systemctl enable syncthing@username
-Disable Syncthing at Boot: systemctl disable syncthing@username
-.
-.fi
-.
-.IP "" 0
-.
-.SS "Discovery Server"
-The discovery server is an optional service that can be run and connected to
by Syncthing in place of the default\. To have clients connect to a custom
discovery server, you\'ll want to start the service on your server, then open
"\fI~/\.syncthing/config\.xml\fR" and replace "\fIannounce\.syncthing\.net\fR"
with your custom discovery server\'s address\.
-.
-.IP "" 4
-.
-.nf
-
-Start Discovery Server Service: systemctl start syncthing\-discosrv
-Stop Discovery Server Service: systemctl stop syncthing\-discosrv
-Restart Discovery Server Service: systemctl restart syncthing\-discosrv
-Enable Discovery Server at Boot: systemctl enable syncthing\-discosrv
-Disable Discovery Server at Boot: systemctl disable syncthing\-discosrv
-.
-.fi
-.
-.IP "" 0
-.
-.SH "Configuring"
-The config folder is automatically generated when syncthing is run for the
first time, and can be found (by default) @ \'~/\.syncthing\'\.
-.
-.P
-The admin GUI starts automatically when the service is running, and remains
available (by default) @ \fIhttp://localhost:8080\fR\.
-.
-.P
-On the left is the list of "repositories", or directories to synchronize\. On
the right is the list of nodes\. Currently there is only one node, the local
node\. The first thing you need to do is tell each node about the other node so
they can talk to each other\. Click the "Add Node" button on each node\.
You\'ll get the "Add Node" dialog, where you need to input the node ID of the
other node and give it a short name\. If you have both nodes GUI available on
the same machine (say via remote desktop or a port forward) you can simply cut
and paste the node ID from the bottom of one dialog to the other\. Otherwise it
is probably easiest to send the ID:s in a mail to yourself or something
similar\.
-.
-.P
-The node IDs are quite long and unwieldy, but this is part of the security of
the system\. They uniquely identify node\'s key so that each node can be
assured of who it\'s talking to\. The node ID is not a password and does not
need to be kept secret\.
-.
-.P
-Once you click "Save" the new node will appear on right side of the GUI and a
prompt will be shown to indicate the need for a restart\.
-.
-.P
-Syncthing needs to be restarted for configuration changes like new nodes and
repositories to take effect\. We shouldn\'t restart just yet though, because we
also need to share the repository with the new node\. Click "Edit" on the
repository to the left, and check the checkbox for the other node before saving
and restarting\.
-.
-.P
-When you click restart syncthing will first restart, then come back up and
after a while (up to a minute) connect to the other node\.
-.
-.P
-At this point the two nodes share an empty directory\. Adding files to the
Sync directory on either node will synchronize those files to the other side\.
Each node scans for changes every sixty seconds, so changes can take a bit over
a minute to propagate to the other side\.
-.
-.P
-An up to date version of this documentation that includes images can be found
@ \fIhttp://discourse\.syncthing\.net/t/getting\-started/46\fR\.
-.
-.SH "Online Documentation"
-Additional documentation can be found online @ discourse site
\fIhttp://discourse\.syncthing\.net/category/documentation\fR\.
-.
-.SH "License"
-All documentation and protocol specifications are licensed under the Creative
Commons Attribution 4\.0 International License
\fIhttp://creativecommons\.org/licenses/by/4\.0/\fR\.
-.
-.P
-All code is licensed under the MIT License
\fIhttps://github\.com/calmh/syncthing/blob/master/LICENSE\fR\.
Copied: syncthing/repos/community-i686/syncthing.1 (from rev 132259,
syncthing/trunk/syncthing.1)
===================================================================
--- syncthing.1 (rev 0)
+++ syncthing.1 2015-04-26 11:53:27 UTC (rev 132260)
@@ -0,0 +1,94 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "SYNCTHING" "" "May 2014" "" "syncthing"
+.
+.SH "Project Goals"
+This is the \fBsyncthing\fR project\. The following are the project goals:
+.
+.IP "1." 4
+Define a protocol for synchronization of a file repository between a number of
collaborating nodes\. The protocol should be well defined, unambiguous, easily
understood, free to use, efficient, secure and language neutral\. This is the
Block Exchange Protocol
\fIhttps://github\.com/calmh/syncthing/blob/master/protocol/PROTOCOL\.md\fR\.
+.
+.IP "2." 4
+Provide the reference implementation to demonstrate the usability of said
protocol\. This is the \fBsyncthing\fR utility\. It is the hope that
alternative, compatible implementations of the protocol will come to exist\.
+.
+.IP "" 0
+.
+.P
+The two are evolving together; the protocol is not to be considered stable
until syncthing 1\.0 is released, at which point it is locked down for
incompatible changes\.
+.
+.P
+Syncthing does not use the BitTorrent protocol\. The reasons for this are 1)
we don\'t know if BitTorrent Sync does either, so there\'s nothing to be
compatible with, 2) BitTorrent includes a lot of functionality for making sure
large swarms of selfish agents behave and somehow work towards a common goal\.
Here we have a much smaller swarm of cooperative agents and a simpler approach
will suffice\.
+.
+.SH "Systemd"
+The systemd services for Syncthing and its discovery server can be used to
start, stop, restart and enable them to run at boot\.
+.
+.SS "Syncthing"
+Syncthing is the main sync client and can be controlled using systemd using
the commands below\. Since Syncthing is run for a particular user, replace
\'username\' in the commands below with the name of the user you want it to run
it under\.
+.
+.IP "" 4
+.
+.nf
+
+Start Syncthing: systemctl start syncthing@username
+Stop Syncthing: systemctl stop syncthing@username
+Restart Syncthing: systemctl restart syncthing@username
+Enable Syncthing at Boot: systemctl enable syncthing@username
+Disable Syncthing at Boot: systemctl disable syncthing@username
+.
+.fi
+.
+.IP "" 0
+.
+.SS "Discovery Server"
+The discovery server is an optional service that can be run and connected to
by Syncthing in place of the default\. To have clients connect to a custom
discovery server, you\'ll want to start the service on your server, then open
"\fI~/\.syncthing/config\.xml\fR" and replace "\fIannounce\.syncthing\.net\fR"
with your custom discovery server\'s address\.
+.
+.IP "" 4
+.
+.nf
+
+Start Discovery Server Service: systemctl start syncthing\-discosrv
+Stop Discovery Server Service: systemctl stop syncthing\-discosrv
+Restart Discovery Server Service: systemctl restart syncthing\-discosrv
+Enable Discovery Server at Boot: systemctl enable syncthing\-discosrv
+Disable Discovery Server at Boot: systemctl disable syncthing\-discosrv
+.
+.fi
+.
+.IP "" 0
+.
+.SH "Configuring"
+The config folder is automatically generated when syncthing is run for the
first time, and can be found (by default) @ \'~/\.syncthing\'\.
+.
+.P
+The admin GUI starts automatically when the service is running, and remains
available (by default) @ \fIhttp://localhost:8080\fR\.
+.
+.P
+On the left is the list of "repositories", or directories to synchronize\. On
the right is the list of nodes\. Currently there is only one node, the local
node\. The first thing you need to do is tell each node about the other node so
they can talk to each other\. Click the "Add Node" button on each node\.
You\'ll get the "Add Node" dialog, where you need to input the node ID of the
other node and give it a short name\. If you have both nodes GUI available on
the same machine (say via remote desktop or a port forward) you can simply cut
and paste the node ID from the bottom of one dialog to the other\. Otherwise it
is probably easiest to send the ID:s in a mail to yourself or something
similar\.
+.
+.P
+The node IDs are quite long and unwieldy, but this is part of the security of
the system\. They uniquely identify node\'s key so that each node can be
assured of who it\'s talking to\. The node ID is not a password and does not
need to be kept secret\.
+.
+.P
+Once you click "Save" the new node will appear on right side of the GUI and a
prompt will be shown to indicate the need for a restart\.
+.
+.P
+Syncthing needs to be restarted for configuration changes like new nodes and
repositories to take effect\. We shouldn\'t restart just yet though, because we
also need to share the repository with the new node\. Click "Edit" on the
repository to the left, and check the checkbox for the other node before saving
and restarting\.
+.
+.P
+When you click restart syncthing will first restart, then come back up and
after a while (up to a minute) connect to the other node\.
+.
+.P
+At this point the two nodes share an empty directory\. Adding files to the
Sync directory on either node will synchronize those files to the other side\.
Each node scans for changes every sixty seconds, so changes can take a bit over
a minute to propagate to the other side\.
+.
+.P
+An up to date version of this documentation that includes images can be found
@ \fIhttp://discourse\.syncthing\.net/t/getting\-started/46\fR\.
+.
+.SH "Online Documentation"
+Additional documentation can be found online @ discourse site
\fIhttp://discourse\.syncthing\.net/category/documentation\fR\.
+.
+.SH "License"
+All documentation and protocol specifications are licensed under the Creative
Commons Attribution 4\.0 International License
\fIhttp://creativecommons\.org/licenses/by/4\.0/\fR\.
+.
+.P
+All code is licensed under the MIT License
\fIhttps://github\.com/calmh/syncthing/blob/master/LICENSE\fR\.
Deleted: syncthing.install
===================================================================
--- syncthing.install 2015-04-26 11:42:23 UTC (rev 132259)
+++ syncthing.install 2015-04-26 11:53:27 UTC (rev 132260)
@@ -1,9 +0,0 @@
-post_install() {
-cat << EOF
- To start and/or enable syncthing execute the following,
- replacing 'user' with your username.
-
- systemctl start syncthing@user
- systemctl enable syncthing@user
-EOF
-}
Copied: syncthing/repos/community-i686/syncthing.install (from rev 132259,
syncthing/trunk/syncthing.install)
===================================================================
--- syncthing.install (rev 0)
+++ syncthing.install 2015-04-26 11:53:27 UTC (rev 132260)
@@ -0,0 +1,9 @@
+post_install() {
+cat << EOF
+ To start and/or enable syncthing execute the following,
+ replacing 'user' with your username.
+
+ systemctl start syncthing@user
+ systemctl enable syncthing@user
+EOF
+}
