Hi
Reasently I have been up to *BSD, and I find it vere interesting.
Though I have this problem that I am using my onboard card for Arch.
*BSD don't like it, and Arch doesn't like my D-Link card, which mean I
have to swith ethernet card every time I want to use *BSD or Arch.
I want to know, how I can use my D-link card on Arch with kernel26.
Here's some info on the D-Link DFE530TX card:
# dmesg | grep eth1
eth1: VIA Rhine III at 0x1a000, 00:11:95:d8:3b:a6, IRQ 18.
eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
# lshwd
01:07.0 Ethernet controller: VIA Technologies|VT6105 [Rhine III
10/100] (via-rhine)
# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 280 4 0 0 0 0 0 0
280 4 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0
2738 9 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:11:95:D8:3B:A6
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18 Base address:0xa000
--
Arch Linux bruger
Hvis du har spørgsmål om Arch eller Linux, så henvend dig her:
[EMAIL PROTECTED]
_______________________________________________
arch mailing list
[email protected]
http://www.archlinux.org/mailman/listinfo/arch
