On Mon, Jun 26, 2006 at 07:17:44PM +0200, Benoit Myard wrote: > > Look through lsmod, or dmesg | grep eth0 might also yield usefull > > information. > > [EMAIL PROTECTED] ~]$ dmesg | grep eth0 > eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:38:05:05:bd > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > eth0: no IPv6 routers present > lsmod | grep -i tulip > [EMAIL PROTECTED] ~]$ lsmod | grep -i b44 > b44 22924 0 > mii 5376 1 b44 > > So, am I right if I say that I use the mii network driver ? If so, both mii > and tulip are broken under 2.6.17. > > Should we fill a bugreport now or rather wait for more similar problems ?
I think now, if you go ahead and do it and link me. Out of curiosity can you attach an lshwd and entire dmesg to the bug, perhaps its specific to some other hardware chipset wince we do seem to have different ethernet cards. _______________________________________________ arch mailing list [email protected] http://www.archlinux.org/mailman/listinfo/arch
