Scott Weisman wrote:
>>
I have a VPS at Slicehost. They support a number of Linux distros out
of the box, but they do not support Arch. After a bunch of reading, I
was able to get Arch installed successfully. Everything works fine
except for one problem. I believe it is specific to Arch (read below
for why). The root directory is mounted twice when the server boots:
root:~# mount
/dev/sda1 on / type ext3 (rw,errors=remount-ro)
none on /sys type sysfs (rw)
none on /proc type proc (rw)
udev on /dev type tmpfs (rw)
/dev/sda1 on /dev/.static/dev type ext3 (rw,data=ordered)
none on /dev type ramfs (rw)
none on /proc/bus/usb type usbfs (rw)
none on /dev/pts type devpts (rw)
none on /dev/shm type tmpfs (rw)
{snip}
<<
Don't know if this might be helpful, or not, but I haven't seen any of
the suggested workarounds mentioned:
http://wiki.xensource.com/xenwiki/XenFaq#head-02d132844b7a2d6776bb0e4ce23ee04d4be37d81
grndrush
_______________________________________________
arch mailing list
[email protected]
http://archlinux.org/mailman/listinfo/arch
