On Freitag, 29. Juni 2007 15:37 bardo wrote: At first thanks for the hint about microcode_ctl in aur because i never register it.
> On 6/29/07, Jérémie Dimino <[EMAIL PROTECTED]> wrote: >> But i have not exactly the same processor: >> >> # cat /proc/cpuinfo | grep model\ name >> model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz >> model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz > > So you use a notebook. I have a desktop, maybe this is the reason why > it doesn't work (even though it seems pointless to me). Thanks for the > infos :) I have here two pc's with core2duo: server has the same cpu as you and the desktop has an Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz. On the server with opensuse and an asus motherboard cpufreq works well. But on the desktop with Archlinux and an MSI motherboard i have the same problems as you. I can't guarantee it but i think in the most cases the bios of your motherboard is the first which can be bad and in my case a longer inquest in the net shows me that with the msi board cpufreq don't works under linux ... okay, there is a new bios out so perhaps it solves the problem but i haven't install it at the moment because for me cpufreq is more interesting for the server. So the question number one is: Had cpufreq worked with an older kernel version or is this the first time that you try to use it? Sorry if this question is wrong here for you. Good luck, Attila _______________________________________________ arch mailing list [email protected] http://archlinux.org/mailman/listinfo/arch
