Don't think it's the fault of the release, just looks like you're not in a group that it's looking for. I'll look into that when I get home, because I can print fine. Try adding yourself to the sys group, log out, and log back in and see if you can print.
On 9/10/07, slubman <[EMAIL PROTECTED]> wrote: > Le Monday 10 September 2007 18:19:21 nesl247, vous avez écrit: > > Several days ago I submitted an updated pkgbuild and .install file in > > a bug report I reported about the package being outdated. Try that, I > > think I might have changed some stuff from the actual pkgbuild. > > > > And you did restart the cups daemon right? > > > > Hi > > I've also tried to make a PKGBUILD for the newer version of hplip. It didn't > let me print. > > I've tried your PKGBUILD, and I've got the same error that I had with mine. > The printer is detected, but whenever I try to print, I can see this in > my /var/log/everything.log: > > Sep 10 18:46:22 melody PSC_1600_series?serial=MY56ND42KXL0: io/hpmud/musb.c > 549: invalid product id string: Operation not permitted > Sep 10 18:46:22 melody PSC_1600_series?serial=MY56ND42KXL0: io/hpmud/musb.c > 1003: unable to open hp:/usb/PSC_1600_series?serial=MY56ND42KXL0 > Sep 10 18:46:22 melody PSC_1600_series?serial=MY56ND42KXL0: INFO: open device > failed; will retry in 30 seconds... > Sep 10 18:46:23 melody hpijs: io/hpmud/musb.c 549: invalid product id string: > Operation not permitted > Sep 10 18:46:23 melody hpijs: io/hpmud/musb.c 1003: unable to open > hp:/usb/PSC_1600_series?serial=MY56ND42KXL0 > > Looks like something is really wrong with the newer hplip releases. > > > On 9/10/07, Ravi Desai <[EMAIL PROTECTED]> wrote: > > > Hey, > > > The current hplip package in the repositories is 1.7.4a, while the latest > > > package is 2.7.7. > > > I am trying to build and install a 2.7.7 package using the PKGBUILD and > > > hplip file from the package in the current repository. While building the > > > package goes without any problems, the package itself does not work. > > > -- The CUPS test page does not print, and the hp-toolbox test page does > > > not print. > > > -- The cups interface at localhost:631 says "open device failed; will > > > retry in 30 seconds..." > > > -- hp-toolbox starts but also displays the message "Session management > > > error: Authentication Rejected, reason : None of the authentication > > > protocols specified are supported and host-based authentication failed" > > > > > > The reason I'm trying to build the latest hplip package is because the > > > 1.7.4a package does not work for me anymore - the hp-toolbox program > > > returns a AttributeError, and the only thing I can print is the CUPS test > > > page. > > > > > > If anyone has suggestions or tips, please let me know. > > > Thanks, > > > Ravi > > > > > -- > slubman > site: http://www.slubman.info/ > > _______________________________________________ > arch mailing list > arch@archlinux.org > http://archlinux.org/mailman/listinfo/arch > -- Alex Heck - nesl247 _______________________________________________ arch mailing list arch@archlinux.org http://archlinux.org/mailman/listinfo/arch
