Actually, there is a Chrome browser add-on that lets you do this as well. I do it all the time on my chrome OS devices
-Joe On Aug 11, 2016 12:17 PM, "Russell Hyer" <[email protected]> wrote: > And sorry for the non-free link here, but this is just to back up my > earlier point. So here's the link: > > http://support.logitech.com/en_us/software/unifying > > True, it runs on 2.4GHz radio, so you could reverse engineer it if you > were bored for a month. But, as you can see the software itself > (which controls the pairing options if you want to use a different > receiver, or fix issues) only "works" on W'doze. > > HTH, > > Thanks > > Russell > > On 11/08/2016, Russell Hyer <[email protected]> wrote: > > Hi Luke, > > > > It seems that you're referring to the Logitech unifying receivers. The > > issue here is that out of the box these support only the devices that > > they've been paired with at the factory, but can support up to 6 if > > memory serves (you can check out the true limit on the L'tech > > website). Anyway, to actually pair these (ok, re-pair (that sounds > > awful, but you get the gist)) you need the software and that's only > > actually made available on proprietary OSes, typically Windows and > > Mac. (Of course, the nice thing is that the pairing info is stored in > > the receiver at the hardware level, so you'd only need minimal contact > > with non-libre systems, but I thought I should at least highlight the > > issue). > > > > Thanks, > > > > Russell > > If watchmaking were a science, eureka moments would occur on time! > > > > On 11/08/2016, Luke Kenneth Casson Leighton <[email protected]> wrote: > >> --- > >> crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68 > >> > >> > >> On Thu, Aug 11, 2016 at 2:51 PM, Muhammed Adel Afzal <[email protected]> > wrote: > >>> Thanks for the reply Luke. My friend had an Acer laptop and I thought > >>> that the keyboard in that was great. > >>> > >>> Will you sell replacement batteries or tell us where to order a > >>> replacement? > >> > >> yeahhh. these are e-bike batteries, i'll have to stock up on them, > >> the company that makes them is a wholesaler. you also have to be > >> *real* careful, they can deliver an *enormous* amount of current - the > >> tabs are metal 1in wide and 0.5mm thick coming out of the battery. > >> > >> > >>> I suppose that if I did not want to run the battery down while I am > >>> working I could use the USB + HDMI Cable Set for Standalone, with a > >>> keyboard and mouse, and my cell phone charger to power the EOMA68 > >>> computer > >>> card, right? > >> > >> yeahyeah, no that's the whole idea. you'll also need a USB hub (or > >> one of those logitech wireless keyboard + mouse combo usb dongles) i'm > >> using a logitech K400r you can look that up > >> > >> or if you get the right adapter you can use one of those external > >> battery packs to charge up / operate off of: find a 12v one and you'll > >> be fine. > >> > >>> Would it be possible to adjust the wiring or add a switch to disconnect > >>> the battery? Could any electrician do it or would you consider making > >>> instructions? Or would it be safer to leave it stock? > >> > >> it should be doable by a competent electrician. the casework > >> designs are available so 3D printing a version with room for a switch > >> is an easy enough task. > >> > >> l. > >> > >> _______________________________________________ > >> arm-netbook mailing list [email protected] > >> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > >> Send large attachments to [email protected] > > > > _______________________________________________ > arm-netbook mailing list [email protected] > http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > Send large attachments to [email protected]
_______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
