You know if this works you can't not have HDMI out on the rockchip one right?
On February 8, 2017 11:18:41 AM GMT+03:00, Luke Kenneth Casson Leighton
<[email protected]> wrote:
>assembled here with my friend's equipment, i got the 9161A tab pin
>wrong (GND instead of power), and i managed somehow to reverse the
>order of the OTG pinouts 5-1, despite cut/paste from a known working
>board. after pulling up the 3.3v regulator and putting a top-mount OTG
>reversed in place of the mid-mount, powerup worked and the GL850G USB
>Hub came up.
>
>tomorrow i will test the tfp401a by... you'll like this... configuring
>an A20 board to do HDMI output, and wiring it to the passthrough card
>:)
>
>l.
>
>---
>crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
>
>_______________________________________________
>arm-netbook mailing list [email protected]
>http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
>Send large attachments to [email protected]
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________
arm-netbook mailing list [email protected]
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachments to [email protected]
