--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Sun, Apr 30, 2017 at 7:44 AM, Tor, the Marqueteur <[email protected]> wrote: > Thought I'd give a try at how a solid wood version would come out. Here > is the result of about 45 minutes prototyping with a piece of 3/8" Cherry > I had lying around. those look _great_. > A couple notes: The 5/64" (.078", 1.98mm) bit has some tendency to > wander, as can be seen in the holes. I also goofed the measurement so > these are 11/16" instead of 9/16" wide. I didn't notice that until I was > nearly done, and figured that since they weren't actually going to be > used it didn't matter. one of the holes is space-saving (for 3d-printing), the other is essential (and is 3.5mm diameter) for the bolts to hold everything together. > I also didn't add the slot for the PCB, mostly because I wasn't sure of > the size, and I didn't have the appropriate cutter lying close by. I > have a couple thoughts on that. hmm me too: a CNC lathe would do the trick. the slot is essential in one of the parts for access to the PCMCIA eject-button. http://hands.com/~lkcl/eoma/kde_tablet/3dcase/microdesktop_model2_corner.stl l. _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
