--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Thu, May 11, 2017 at 4:32 PM, Ismo Väänänen <[email protected]> wrote: >>Wouldn't the PCMCIA card thickness be an issue when using a CPU module? > > According to the mechanical drawing on page 32 of the v1.0 GR8 datasheet the > SoM is at maximum 1.12mm thick. This should fit nicely inside even the 3.5mm > typeI EOMA68 case. > https://github.com/NextThingCo/CHIP_Pro-Hardware/blob/master/Datasheets/GR8_Datasheet_v1.0.pdf that's the SoC itself. the "mechanical drawing" for the CHIP_PRO v1.0 module states that it's a total of 5.2mm in height. TOP component clearance is 1.4mm, there's an OTG connector on it which will be... 2.5mm or so... no idea. actual dimensions are 45 x 30mm so yes _easily_ fits length-height-wise into the 78.1 x 43.something size of an EOMA68 PCB. l. > -Ismo > > _______________________________________________ > arm-netbook mailing list [email protected] > http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > Send large attachments to [email protected] _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
