Hi Luke, Hm, that is sad. I somewhat fear that these cases are being phased out and soon will no longer be available :-/
Does he have both type 2 and type 3 cases? I saw some type 3 cases with screws and everything which lead me to the conclusion that it could actually be possible to open/close them and insert/remove the PCB that is inside? For type 2, this appears not to be possible? If it is about receiving data, I can basically set up pretty much everything, e.g.: receive via email, dedicated GIT, anonymous file drop off, etc. ;-) Cheers, Vincent On 05/16/2017 12:33 AM, Luke Kenneth Casson Leighton wrote: > On Mon, May 15, 2017 at 11:27 PM, Vincent <[email protected]> wrote: >> Hi everyone, >> >> I just did a little digging to find suitable sources for these cases. >> Since working on the i.MX7-based card, I would really like to tinker >> with the cases, too. >> >> Two samples of each type would be nice. Any idea where to get them? >> Unfortunately, I could not find a good source. > > yep. you won't. there's only two that i know, and they're the exact > same part. i was waiting to hear back from you in order to introduce > you to mike (the factory that has the parts), and also waiting to hear > back from you so i can send you the files i've been working on. did > you see the message on this list which was in response to your > introduction about the iMX7 card? i changed the name of the list so it > may have affected any filters that you might have. > > l. > > _______________________________________________ > arm-netbook mailing list [email protected] > http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > Send large attachments to [email protected] > _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
