2017-08-10 10:18 GMT+02:00 Luke Kenneth Casson Leighton <l...@lkcl.net>:
> On Thu, Aug 10, 2017 at 9:01 AM, mike.v...@gmail.com
> <mike.v...@gmail.com> wrote:
>> 2017-08-09 15:23 GMT+02:00 Luke Kenneth Casson Leighton <l...@lkcl.net>:
>> Make sure the'res as much solid GND on the layer above and below the
>> traces, again shielding.
>
>  these are layer 1 and layer 6, and layer 2 and 5 are solid GND.

I was referring mostly to layer 3 and 4. The diff pair is either on 3
or 4. If it is on 3 a slab of GND should be on 4 and vice versa.

It's
1. Vsuply + components
2. Ground
3. HF
4. HF
5. Ground
6. Vsuply + componnents

Right?

>> If tight for space you can use 90% corners with a chamfered outer
>> edge. I suppose the chamfer acts like a mirror.
>
>  i'd *really* prefer not to do that :)
>
>> https://www.maximintegrated.com/en/app-notes/index.mvp/id/5100
>> Figure 6
>
> wow that's pretty bad-ass.

Yeah I had read a more extensive guide in a TI pdf somewhere, can find
it at the moment. But TI documentation also schizo's on curves vs.
corners of 35 degrees and chamfered 90 degrees.

_______________________________________________
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachments to arm-netb...@files.phcomp.co.uk

Reply via email to