Hi Mike, On 9/15/17, [email protected] <[email protected]> wrote: > https://hackaday.com/2017/09/12/hackaday-prize-entry-retrofit-a-nokia/ > https://hackaday.io/project/21263-nokia-3210-retro-fit-board > > Quote from the project log: > "With the patched I submitted you can turn KiCad into a 'I know what I > am doing' mode. Which meas you can place any type of via anywhere. You > should not do it though. Vias are pretty well constraint by the > manufacturer of the board. Since KiCad does not know of any layer > thickness, production technologies and such it restricts to what is a > sensible lowest common denominator." > > Hmm so KiCad does not have a "PCB manufacturer constraints" input? How > handy... NOT >
Of course it has. But you need to realize that even Gerber doesn't have advanced information you need for more complex designs (i.e PCB dozens of layers with different type of impedance, etc). For that you need an EDA with IPC-2581 support that even Eagle (AFAIK) doesn't have and many other commercial EDAs also don't. BR, Alan _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
