--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Mon, Sep 18, 2017 at 2:14 PM, Richard Wilbur <[email protected]> wrote: > > > Sent from my iPhone > >> On Sep 17, 2017, at 01:29, Luke Kenneth Casson Leighton <[email protected]> >> wrote: >> >> hiya richard, ok yes, took a look at what you wrote, >> http://lists.phcomp.co.uk/pipermail/arm-netbook/2017-September/014681.html >> and yes, really, a cutout and markup of the bits of the image you're >> re referring to would really do it. > > Will see what I can do after looking at the new images. thx richard. i didn't do the TX2 double-wiggle, i don't think there's enough space (because of the GND vias... which i can't remove) >> i've removed the 15mil clearance >> design rule, reverted back to the *standard* 6mil clearance that was >> is in place everywhere (and is now back in place as the standard >> blanket rule, no exceptions, i.e. it's all 6mil clearance from >> everything-to-everything.. oh... except the board edge of course, >> which is and always was 12mil) > > I'm mildly surprised to hear that the default clearance > (everything-to-everything) used to be 6mil: either it changed and I missed > the announcement or it was that value before I got involved. The value I > understood for minimum clearance was 5mil[1]. 5 mil - yes, sorry. i didn't check the actual design rules and it's been a couple of weeks, stuff drops out of my memory quite fast. l. _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
