--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Thu, Mar 1, 2018 at 10:02 PM, Richard Wilbur <[email protected]> wrote: > If we did decide to roll a v1.8 micro-desktop board, it would afford > us the opportunity to bring two of the presently unconnected GPIO18-21 > lines to the expansion header in place of VESA_SCL and VESA_SDA (which > are after all available on pins 15 and 12 of the VGA connector). If > VESA_SCL and VESA_SDA are more useful on the expansion header then, by > all means, forget this suggestion. the reason i brought those out is just in case someone decided they wanted to use them as plain GPIO. > The other option to accommodate all our GPIO goodness would be to > replace J5 (2x10 header) with a 2x11 or 2x12 header yep. > allowing us to > bring all the GPIO pins to the expansion header (the only difference > being whether we would prefer to retain VESA_SCL and VESA_SDA in the > header). yes. l. _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
