--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Wed, Apr 25, 2018 at 4:30 PM, Chadvellacott <[email protected]> wrote: > Luke Kenneth Casson Leighton wrote on 2018/04/24 9:39 PM: >> >> On Tue, Apr 24, 2018 at 11:13 PM, Chadvellacott >> <[email protected]> wrote: > > ~ >>> >>> And how wide is the lap-top planned to be (from the left edge of the >>> case, to the right edge, across the key-board)? >> >> >> you can check for yourself by downloading the GPLv3-licensed 3D CAD >> source code. >> >> https://www.youmagine.com/designs/libre-hardware-licensed-parametric-laptop-design/ >> > That page said "The parts are deliberately designed to be printable on a > standard 200x200mm Mendel90 style 3D printer, so that even a 15.6in laptop > may be created by printing the longest parts (260mm) across the diagonal of > a Mendel90 print bed (280mm)." > But I guess that 260 mm is not meant to span the whole back of the > screen, considering things lower down on this message. that's the vertical. case is thus divided into 7 separate parts for LCD and 7 main structural parts for the body. vertical @ 260mm left right middle horizontal @ 160mm (appx): front left front right back left back right it's... complicated. >> >> >>> (I imagine that 15.6 inches >>> is for the screen itself rather than the whole case, and is a diagonal >>> measurement.) >> >> >> the LCD is listed on the rhombus-tech page, from which the datasheet >> may be sourced, and there is approximately 2mm left and right, about >> 10mm top, about.... 25mm at the bottom. >> >> that gives the overall dimensions. > > > Yes, the "youmagine"-page led to > http://rhombus-tech.net/community_ideas/laptop_15in/news/ > to > http://rhombus-tech.net/community_ideas/laptop_15in/ > to > "AUO B156XTN02.2" for LCD, > from which "duckduckgo" led to > http://www.panelook.com/B156XTN02.2_AUO_15.6_LCM_parameter_15249.html > which said > "outline size of 359.3(W)×209.5(H)×5.5(D) mm" there you go. > I did not get the "PDF"-data-sheet offered there, because I do not have > login-credentials there. But the quoted numbers are probably correct, and > are confirmed by > http://www.lcd-source.com/Product_Specifications_AUO_B156XTN02.2 > > 359.3 mm width of LCD, plus 2 mm on the left, plus 2 mm on the right, is > 363.3 mm, or about > > 14.3 inches wide for the top part of the "clam-shell". > > Thanks for the directing. That about answers my question. >> >> >> l. > > > _______________________________________________ > arm-netbook mailing list [email protected] > http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook > Send large attachments to [email protected] _______________________________________________ arm-netbook mailing list [email protected] http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to [email protected]
