> On 13. Jan 2023, at 04:12, Luke Kenneth Casson Leighton <l...@lkcl.net> wrote: > > On Thursday, January 12, 2023, Andreas Grapentin <andr...@grapentin.org > <mailto:andr...@grapentin.org>> > wrote: >> >> >>> On 12. Jan 2023, at 15:44, Luke Kenneth Casson Leighton <l...@lkcl.net> > wrote: >>> >>> On Thursday, January 12, 2023, Andreas Grapentin <andr...@grapentin.org> >>> wrote: >>>> >>>> I'm curious -- does the old parabola image no longer work?? >>> >>> from 2016? unfortunately the MicroSD card with the only >>> copy destroyed itself. >> >> I still have a copy, I think. I’ll go looking for it. > > yes please. do you use bittorrent, can you publish a magnet link? > i will grab and seed it if you do?
I’ve found the parabola image I used back in 2021, and tried to boot it on an EOMA card revision 2.7.4 and a microdesktop revision 1.7 In the process of attaching peripheries, I must have blown something on the microdesktop, the power LED no longer lights up, tested multiple chargers. I’m fairly certain that the LED did light up green when I started working on the board today. Is it possible that I blew a fuse somewhere? Apart from that, I currently can’t get the system to boot. I have output from the boot loader, but it’s not much: U-Boot SPL 2017.01-2 (Jan 18 2017 - 21:30:38) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC2MMC Device 1 not found spl: could not find mmc device. error: -19 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### This is when I insert the sd card in the EOMA card directly. When I insert the sd card into the microdesktop, I don’t get anything. Still working on it though. I’m confident that this is salvageable, considering that I do get boot loader output through UART. I’ll keep looking into it. If you have any hints, I’d appreciate it. in the meantime, I’ll prepare a magnet link / http direct download for the image I’m using, in case it’s useful for someone else. I’ll send those links to the list ASAP. Best, Andreas _______________________________________________ arm-netbook mailing list arm-netbook@lists.phcomp.co.uk Configuration, options, subscribe and unsubscribe at: http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to: arm-netb...@files.phcomp.co.uk
