Hey folks, A few issues with the RC2 image running on PandaBoard (ES):
1). It doesn't boot at all. This is because the image contains a weird partition layout, not aligned, etc. MLO never has a chance. The SD Card had this as the first partition: /dev/sdb1 1953 1001953 500000+ 83 Linux Which I fixed to look as it should: /dev/sdb1 * 2048 411647 204800 6 FAT16 At which point the MLO actually loads, as does u-boot.img, etc. 2). Unless I am missing something, there is nothing within boot/boot.scr on the root ext4 filesystem for ext4load to pull in, but that could be pilot error. So let me know about that one. If it's just the first item, then there's no need to make an RC4 because the instructions (that have to be run anyway) can include making a correctly aligned filesystem with the correct constraints on size, filesystem type, etc. required for MLO. I did note this on IRC yesterday that MLO is finnicky and I did have a reason (as you see). Jon. _______________________________________________ arm mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/arm
