Hi, On 08/01/2014 08:31 PM, Robert Moskowitz wrote: > For me anyway. I am begining to see how the pieces are suppose to fit > together. > > The installer script is coded for only the Cubietruck, and if you don't > capitalize it, the script fixes that. > > There IS a dtb for the cubieboard2: > > /run/media/rgm/__boot/dtb-3.16.0-0.rc7.git1.1.fc21.armv7hl/sun7i-a20-cubieboard2.dtb > > But no .bin supplied.
Correct. > I got u-boot-sunxi-cubieboard2.tar.xz from someplace on Jul 24 which has in > it: That won't work because it is missing the "generic distro support" patches Fedora's images rely on. I've a u-boot tree which supports a lot more allwinner devices then just the cubietruck, and does include the generic distro support. To build this do the following (on an x86 machine) yum install gcc-arm-linux-gnu git clone https://github.com/jwrdegoede/u-boot-sunxi.git cd u-boot-sunxi git checkout -B next origin/next make -j4 CROSS_COMPILE=arm-linux-gnu- Cubieboard2_defconfig make -j4 CROSS_COMPILE=arm-linux-gnu- sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/FIXME bs=1024 seek=8 Where FIXME is the block device for your sdcard, then umount any partitions mounted from the sdcard, sync, and boot your cubieboard2 with it. Regards, Hans _______________________________________________ arm mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/arm
