On 14 August 2014 19:55:03 GMT+08:00, Peter Robinson <[email protected]> wrote: >Hi, > >> I have a headless cubieboard 2 running a 3.4 kernel that came with >the >> board, but a Fedora rootfs already. >> >> It's been pretty workable, but now I need to compile an OOT kernel >module, >> and that's a big mess with the magic 3.4 kernel. The defconfig it was >built >> with has gone 404, although a tarball of the sources (with different >> defconfigs) exists. >> >> So after reading the megathreads here about cubieboard 2 support >working, I >> went to look for a rawhide kernel package and give it a try. >> >> However after looking at Wikis that are out of date compared to the >mailing >> list, and an "Arm Koji" that only has 64-bit arm binaries in the >kernel >> package, I have no idea where to go to get the latest armhf kernel >package, >> U-Boot pieces etc. > >ARMv7 was promoted to a primary architecture with Fedora 20 so all >ARMv7 packages are part of mainline Fedora so you get them from the >same place as x86
I see. Thanks to David and Robert as well. >> I think this respin concept is not a good idea, I see rotting one-off >> "respins" including one from Feb for Cubieboard. But all I want is to >> upgrade the 3.4 kernel to use a Fedora one with latest upstream >pieces. My >> fedora rootfs is already in good shape. > >Use F-21 or rawhide images, the process is outlined here [1] Thanks. >> What steps should someone in this situation take to align themselves >with >> latest armv7 hf kernel and boot-related pieces that will work on >Cubieboard >> 2? > >Kernel is upstream. We don't currently have a uboot that supports the >Cubieboard 2 but that will come as part of the uboot 2014.10-rc2 >release that should be in Fedora in 3-4 weeks. OK thanks. I should be happy with upstream kernel if it can boot and do network and usb, which it seems it should. There's a pile of slightly different "appliances" at the rawhide link from the wiki page. http://koji.fedoraproject.org/koji/tasks?state=all&view=tree&method=appliance&order=-id I grabbed the image here http://koji.fedoraproject.org/koji/taskinfo?taskID=7272277 since it mentioned hardfloat and "Minimal". I'm extracting it to a spare SD Card and will try to get a boot by hand on a second cubieboard 2, rather than mess with the rootfs on the main one I'll try to just transplant the /boot pieces if they work on the test one. The 3.4 stuff it shipped with doesn't obviously have a separate dtb so it might take some meddling. Thanks for putting me in the right direction. -Andy >[1] >https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation
_______________________________________________ arm mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/arm
