On 08/19/2014 03:08 PM, Dennis Gilmore wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tue, 19 Aug 2014 14:18:29 -0400
Robert Moskowitz <[email protected]> wrote:
I have a couple SATA drives I would like to test booting from. Is
there anything special I need to do, or can I 'just' attach with a
USB/SATA adapter, run the install script (and the Cubieboard2 uboot
dd command), and boot?
Once I figure out the right power connector, I will be using some IDE
drives on an IDE/SATA adapter as well.
really the best way to install to sata is to put u-boot on a sdcard and
boot the machine. you should have dhcp setup and configure pxe
booting. then just do an install using anaconda.
OK. all new to me.
Are you talking about the interactive network installation presented at:
https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation#Interactive_Network_Installation
??
Or something more specialized?
I can put the Cubieboard2 upboot on with:
dd if=/root/u-boot-sunxi/u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024
seek=8; sync
I have dhcp on my network, do I have to do anything on the SDcard to
support it?
For the anaconda install. No video on the Cubieboard, I only have
serial console and ssh.
And PXE booting. Are you saying that I am not installing to the drive,
but booting all the time from the network?
Confused here... :)
_______________________________________________
arm mailing list
[email protected]
https://admin.fedoraproject.org/mailman/listinfo/arm
