Does anyone have instructions for getting the stock F20 image to run on a Mirabox?
I'm attempting to use the "Fedora-Minimal-armhfp-20-1-sda.raw.xz" image on an SD card. I initially tried booting the image as-is, but it simply hung at "Starting kernel ...". Following some old instructions in this mailing list for F19 from Jon Masters, I appended the "armada-370-mirabox.dtb" to the end of the uImage, which gets much further, but stops at: [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. [ 203.390737] dracut-initqueue[247]: Warning: Could not boot. [ 203.432165] dracut-initqueue[247]: Warning: /dev/sdb3 does not exist So, it obviously can't find the real root filesystem, but I don't know how to remedy this. Any ideas? Thanks, Brian Kambach ________________________________ This message and all attachments are PRIVATE, and contain information that is PROPRIETARY to Intelligent Automation, Inc. You are not authorized to transmit or otherwise disclose this message or any attachments to any third party whatsoever without the express written consent of Intelligent Automation, Inc. If you received this message in error or you are not willing to view this message or any attachments on a confidential basis, please immediately delete this email and any attachments and notify Intelligent Automation, Inc.
_______________________________________________ arm mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/arm
