On Mon, Jan 26, 2015 at 4:14 PM, Frans Meulenbroeks <fransmeulenbro...@gmail.com> wrote: > Follwup: I was unable to boot on beagleboard XM. I used the same offsets to > write MLO and u-boot.img as for beaglebone, but apparently this is not ok as > MLO is not even loaded. > I have also examined another card that does boot and there the MLO also > lives at a different location (actually there it is the first file in a VFAT > FS, not sure if I can dd it on that same location on the boot filesystem in > the FC21 image. > > If someone has done this and can provide some suggestions that would be > greatly appreciated!
The omap34xx/omap36xx/DM3730 used on the BeagleBoard classic & xM... Doesn't support RAW mode.. You need to create the vfat and copy the MLO/u-boot.img/etc.. mmc RAW mode boot was added to the bootrom around the omap4 generation timeline. (I believe the dm81xx was the first according to the TI manual, but i don't have a board to confirm that.) Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
