Hi All, I did some testing of f23 beta on my pcduino3 nano. End result, awesome.
More detailed results: For all testing, installation was done manually via the xzcat <image> | dd of=<card> <mount card> <cd uboot image dir>, dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8 <unmount card> <put sd card into machine and boot> Fedora-Minimal-armhfp-23_Beta-1-sda.raw.xz - Worked great, didn't do too much testing other than network, which worked. Fedora-Xfce-armhfp-23_Beta-1-sda.raw.xz - Worked great - Graphical setup screen / firstboot worked with no problems. - Graphical desktop worked fine. - A bit on the sluggish side, but I believe that was due to the sd card I used. Fedora-Workstation-armhfp-23_Beta-1-sda.raw.xz - Booted, took a while and then I got a graphical screen with a sad face on it telling me something had gone wrong and I should contact my administrator. - Left it at that screen for a while (had breakfast) and when I came back the "firstboot" screen was there and I was able to set things up. - On first bootup, after the firstboot screen, I was able to log in on an alternate screen (Alt-F4) and things looked sorta ok. - On reboot, things went a little crazy. I never got a graphical login. On alternate screens, it felt like my keyboard was haunted, and I was never able to successfully log in. -- I did notice on reboot it was starting virtualization. Quite possibly that was the reason for the crazyness. - Overall, the Workstation build looks like it's for a "real" arm machine, not these small ones. I'm sure with some tweeking I could get it working on the pcduino, but why. Troy
_______________________________________________ arm mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/arm
