Hi Scott,

----- Original Message -----
> Following guide on
> https://fedoraproject.org/wiki/Architectures/ARM/F25/Installation#For_Versatile_Express_Emulation_with_QEMU.
>
> Used images:
> Fedora-Minimal-armhfp-25-1.3-sda.raw
> Fedora-Minimal-armhfp-25-20161117.n.0-sda.raw

It was tested and working on Fedora 25 (using aarch64 and x86 hosts). Could you
provide some more details? What host are you using? Full output would also be
helpful.

Paul

> 
> Guest fails to boot with messages below.
> 
> Please advise.
> 
> [  OK  ] Mounted Configuration File System.
> [   32.037543] ------------[ cut here ]------------
> [   32.038282] WARNING: CPU: 0 PID: 383 at
> drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac
> [   32.039013] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio
> virtio_ring virtio scsi_transport_iscsi
> [   32.040259] CPU: 0 PID: 383 Comm: systemd-udevd Not tainted
> 4.8.6-300.fc25.armv7hl #1
> [   32.040813] Hardware name: Generic DT based system
> [   32.041978] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
> (show_stack+0x18/0x1c)
> [   32.042647] [<c0214108>] (show_stack) from [<c0516624>]
> (dump_stack+0x80/0x9c)
> [   32.043157] [<c0516624>] (dump_stack) from [<c0254f10>]
> (__warn+0xe4/0x104)
> [   32.043689] [<c0254f10>] (__warn) from [<c0254fec>]
> (warn_slowpath_null+0x24/0x2c)
> [   32.044163] [<c0254fec>] (warn_slowpath_null) from [<c0545188>]
> (gic_configure_irq+0x78/0xac)
> [   32.044677] [<c0545188>] (gic_configure_irq) from [<c02abe54>]
> (__irq_set_trigger+0x7c/0x178)
> [   32.045185] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>]
> (__setup_irq+0x4f8/0x5b8)
> [   32.045750] [<c02ac448>] (__setup_irq) from [<c02ac678>]
> (request_threaded_irq+0xbc/0x174)
> [   32.046719] [<c02ac678>] (request_threaded_irq) from [<bf062758>]
> (vm_find_vqs+0x4c/0x2f8 [virtio_mmio])
> [   32.047501] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0a2ca0>]
> (virtscsi_init+0xc8/0x1d0 [virtio_scsi])
> [   32.048125] [<bf0a2ca0>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>]
> (virtscsi_probe+0xe8/0x2d8 [virtio_scsi])
> [   32.048915] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>]
> (virtio_dev_probe+0x114/0x220 [virtio])
> [   32.049706] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
> (driver_probe_device+0x1d0/0x3e8)
> [   32.050283] [<c0630318>] (driver_probe_device) from [<c06305b8>]
> (__driver_attach+0x88/0xf8)
> [   32.050849] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
> (bus_for_each_dev+0x84/0x94)
> [   32.051417] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
> (bus_add_driver+0x180/0x234)
> [   32.051957] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
> (driver_register+0xa8/0xe8)
> [   32.052506] [<c0631134>] (driver_register) from [<bf0a809c>]
> (init+0x9c/0x1000 [virtio_scsi])
> [   32.053107] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>]
> (do_one_initcall+0x130/0x158)
> [   32.053689] [<c0209d48>] (do_one_initcall) from [<c034b188>]
> (do_init_module+0x60/0x1d8)
> [   32.054201] [<c034b188>] (do_init_module) from [<c02d7950>]
> (load_module+0x1ae4/0x2120)
> [   32.054774] [<c02d7950>] (load_module) from [<c02d81a0>]
> (SyS_finit_module+0x94/0xc0)
> [   32.055317] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
> (ret_fast_syscall+0x0/0x3c)
> [   32.055973] ---[ end trace 8580c707e4338642 ]---
> [   32.056360] genirq: Setting trigger mode 1 for irq 51 failed
> (gic_set_type+0x0/0x6c)
> [   32.064328] ------------[ cut here ]------------
> [   32.064759] WARNING: CPU: 0 PID: 381 at
> drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac
> [   32.065372] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio
> virtio_ring virtio scsi_transport_iscsi
> [   32.066367] CPU: 0 PID: 381 Comm: systemd-udevd Tainted: G        W
> 4.8.6-300.fc25.armv7hl #1
> [   32.066987] Hardware name: Generic DT based system
> [   32.067330] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
> (show_stack+0x18/0x1c)
> [   32.067872] [<c0214108>] (show_stack) from [<c0516624>]
> (dump_stack+0x80/0x9c)
> [   32.068397] [<c0516624>] (dump_stack) from [<c0254f10>]
> (__warn+0xe4/0x104)
> [   32.068883] [<c0254f10>] (__warn) from [<c0254fec>]
> (warn_slowpath_null+0x24/0x2c)
> [   32.069390] [<c0254fec>] (warn_slowpath_null) from [<c0545188>]
> (gic_configure_irq+0x78/0xac)
> [   32.069826] [<c0545188>] (gic_configure_irq) from [<c02abe54>]
> (__irq_set_trigger+0x7c/0x178)
> [   32.070217] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>]
> (__setup_irq+0x4f8/0x5b8)
> [   32.070636] [<c02ac448>] (__setup_irq) from [<c02ac678>]
> (request_threaded_irq+0xbc/0x174)
> [   32.071086] [<c02ac678>] (request_threaded_irq) from [<bf062758>]
> (vm_find_vqs+0x4c/0x2f8 [virtio_mmio])
> [   32.071618] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0ad934>]
> (init_vqs+0x1f0/0x3a8 [virtio_net])
> [   32.072160] [<bf0ad934>] (init_vqs [virtio_net]) from [<bf0af3fc>]
> (virtnet_probe+0x524/0x890 [virtio_net])
> [   32.072687] [<bf0af3fc>] (virtnet_probe [virtio_net]) from [<bf0226e0>]
> (virtio_dev_probe+0x114/0x220 [virtio])
> [   32.073218] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
> (driver_probe_device+0x1d0/0x3e8)
> [   32.073712] [<c0630318>] (driver_probe_device) from [<c06305b8>]
> (__driver_attach+0x88/0xf8)
> [   32.074111] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
> (bus_for_each_dev+0x84/0x94)
> [   32.074489] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
> (bus_add_driver+0x180/0x234)
> [   32.074927] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
> (driver_register+0xa8/0xe8)
> [   32.075347] [<c0631134>] (driver_register) from [<c0209d48>]
> (do_one_initcall+0x130/0x158)
> [   32.075795] [<c0209d48>] (do_one_initcall) from [<c034b188>]
> (do_init_module+0x60/0x1d8)
> [   32.076222] [<c034b188>] (do_init_module) from [<c02d7950>]
> (load_module+0x1ae4/0x2120)
> [   32.076631] [<c02d7950>] (load_module) from [<c02d81a0>]
> (SyS_finit_module+0x94/0xc0)
> [   32.076991] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
> (ret_fast_syscall+0x0/0x3c)
> [   32.077356] ---[ end trace 8580c707e4338643 ]---
> [   32.077629] genirq: Setting trigger mode 1 for irq 50 failed
> (gic_set_type+0x0/0x6c)
> [   32.127129] virtio_net: probe of virtio0 failed with error -22
> [   32.153173] ------------[ cut here ]------------
> [   32.153554] WARNING: CPU: 0 PID: 383 at kernel/irq/manage.c:1478
> __free_irq+0xb0/0x29c
> [   32.154061] Trying to free already-free IRQ 51
> [   32.154322] Modules linked in: virtio_net virtio_scsi(+) virtio_mmio
> virtio_ring virtio scsi_transport_iscsi
> [   32.154940] CPU: 0 PID: 383 Comm: systemd-udevd Tainted: G        W
> 4.8.6-300.fc25.armv7hl #1
> [   32.155355] Hardware name: Generic DT based system
> [   32.155677] [<c02192f4>] (unwind_backtrace) from [<c0214108>]
> (show_stack+0x18/0x1c)
> [   32.156110] [<c0214108>] (show_stack) from [<c0516624>]
> (dump_stack+0x80/0x9c)
> [   32.156676] [<c0516624>] (dump_stack) from [<c0254f10>]
> (__warn+0xe4/0x104)
> [   32.157107] [<c0254f10>] (__warn) from [<c0254f6c>]
> (warn_slowpath_fmt+0x3c/0x4c)
> [   32.157590] [<c0254f6c>] (warn_slowpath_fmt) from [<c02aae98>]
> (__free_irq+0xb0/0x29c)
> [   32.158048] [<c02aae98>] (__free_irq) from [<c02ab138>]
> (free_irq+0x64/0x70)
> [   32.158490] [<c02ab138>] (free_irq) from [<bf0a2d5c>]
> (virtscsi_init+0x184/0x1d0 [virtio_scsi])
> [   32.158990] [<bf0a2d5c>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>]
> (virtscsi_probe+0xe8/0x2d8 [virtio_scsi])
> [   32.159630] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>]
> (virtio_dev_probe+0x114/0x220 [virtio])
> [   32.160294] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>]
> (driver_probe_device+0x1d0/0x3e8)
> [   32.160818] [<c0630318>] (driver_probe_device) from [<c06305b8>]
> (__driver_attach+0x88/0xf8)
> [   32.161295] [<c06305b8>] (__driver_attach) from [<c062e5b0>]
> (bus_for_each_dev+0x84/0x94)
> [   32.161772] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>]
> (bus_add_driver+0x180/0x234)
> [   32.162247] [<c062f7dc>] (bus_add_driver) from [<c0631134>]
> (driver_register+0xa8/0xe8)
> [   32.162718] [<c0631134>] (driver_register) from [<bf0a809c>]
> (init+0x9c/0x1000 [virtio_scsi])
> [   32.163160] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>]
> (do_one_initcall+0x130/0x158)
> [   32.163633] [<c0209d48>] (do_one_initcall) from [<c034b188>]
> (do_init_module+0x60/0x1d8)
> [   32.164122] [<c034b188>] (do_init_module) from [<c02d7950>]
> (load_module+0x1ae4/0x2120)
> [   32.164576] [<c02d7950>] (load_module) from [<c02d81a0>]
> (SyS_finit_module+0x94/0xc0)
> [   32.165012] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>]
> (ret_fast_syscall+0x0/0x3c)
> [   32.165448] ---[ end trace 8580c707e4338644 ]---
> [   32.210567] virtio_scsi: probe of virtio1 failed with error -22
> [  414.027184] dracut-initqueue[354]: Warning: Could not boot.
> [  414.306136] dracut-initqueue[354]: Warning:
> /dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not exist
>          Starting Dracut Emergency Shell...
> Warning: /dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not
> exist
> _______________________________________________
> arm mailing list -- arm@lists.fedoraproject.org
> To unsubscribe send an email to arm-le...@lists.fedoraproject.org
> 
sudo virt-install \
>     --name Fedora-$TYPE-armhfp-25 --ram 2048 --arch armv7l --import 
> --os-variant fedora22 \
>     --disk /var/lib/libvirt/images/Fedora-$TYPE-armhfp-25-1.3-sda.raw \
>     --boot 
> kernel=/var/lib/libvirt/images/vmlinuz-4.8.6-300.fc25.armv7hl,initrd=/var/lib/libvirt/images/initramfs-4.8.6-300.fc25.armv7hl.img,kernel_args="console=ttyAMA0
>  rw root=LABEL=_/ rootwait"

Starting install...
Creating domain...                                                              
                                                                                
                                                      |    0 B  00:00:00     
Connected to domain Fedora-Minimal-armhfp-25
Escape character is ^]
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.8.6-300.fc25.armv7hl 
(mockbu...@arm04-builder02.arm.fedoraproject.org) (gcc version 6.2.1 20160916 
(Red Hat 6.2.1-2) (GCC) ) #1 SMP Tue Nov 1 14:46:32 UTC 2016
[    0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt:Machine model: linux,dummy-virt
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0xbc000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 15 pages/cpu @eedda000 s31500 r8192 d21748 
u61440
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 522560
[    0.000000] Kernel command line: console=ttyAMA0 rw root=LABEL=_/ rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1957316K/2097152K available (7042K kernel code, 1093K 
rwdata, 3300K rodata, 1156K init, 853K bss, 74300K reserved, 65536K 
cma-reserved, 1245184K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc08e8b74   (7043 kB)
[    0.000000]       .init : 0xc0c5b000 - 0xc0d7c000   (1156 kB)
[    0.000000]       .data : 0xc0d7c000 - 0xc0e8d7a4   (1094 kB)
[    0.000000]        .bss : 0xc0e8d7a4 - 0xc0f62d30   ( 854 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x080a0000
[    0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ18, assuming 
level low
[    0.000000] arm_arch_timer: WARNING: Please fix your firmware
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 62.50MHz 
(virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff 
max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000093] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 
4398046511096ns
[    0.000201] Switching to timer-based delay loop, resolution 16ns
[    0.002770] Console: colour dummy device 80x30
[    0.003181] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 125.00 BogoMIPS (lpj=312500)
[    0.003338] pid_max: default: 32768 minimum: 301
[    0.010378] Security Framework initialized
[    0.010433] Yama: becoming mindful.
[    0.011148] SELinux:  Initializing.
[    0.016961] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.017001] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.028038] CPU: Testing write buffer coherency: ok
[    0.028580] ftrace: allocating 30396 entries in 60 pages
[    0.875728] /cpus/cpu@0 missing clock-frequency property
[    0.876006] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.876211] Setting up static identity map for 0x40208280 - 0x40208318
[    0.888361] EFI services will not be available.
[    0.890511] Brought up 1 CPUs
[    0.890569] SMP: Total of 1 processors activated (125.00 BogoMIPS).
[    0.890607] CPU: All CPU(s) started in SVC mode.
[    0.926832] devtmpfs: initialized
[    0.935615] VFP support v0.3: implementor 41 architecture 4 part 30 variant 
f rev 0
[    0.949055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 9556302231375000 ns
[    0.960202] atomic64_test: passed
[    0.960496] pinctrl core: initialized pinctrl subsystem
[    0.974466] NET: Registered protocol family 16
[    0.980777] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.983963] cpuidle: using governor menu
[    0.984688] No ATAGs?
[    0.985072] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint 
registers.
[    0.985137] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.988960] Serial: AMBA PL011 UART driver
[    1.017010] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 54, base_baud = 
0) is a PL011 rev1
[    1.026596] console [ttyAMA0] enabled
[    1.031957] irq: type mismatch, failed to map hwirq-27 for /intc!
[    1.076963] vgaarb: loaded
[    1.080134] SCSI subsystem initialized
[    1.081902] usbcore: registered new interface driver usbfs
[    1.082444] usbcore: registered new interface driver hub
[    1.082824] usbcore: registered new device driver usb
[    1.090343] NetLabel: Initializing
[    1.090453] NetLabel:  domain hash size = 128
[    1.090547] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.091460] NetLabel:  unlabeled traffic allowed by default
[    1.093707] clocksource: Switched to clocksource arch_sys_counter
[    1.261488] VFS: Disk quotas dquot_6.6.0
[    1.262400] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.297545] NET: Registered protocol family 2
[    1.309622] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.309998] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.310818] TCP: Hash tables configured (established 8192 bind 8192)
[    1.311394] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.311615] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.315524] NET: Registered protocol family 1
[    1.321922] Unpacking initramfs...
[   10.337741] Freeing initrd memory: 41184K (c8000000 - ca838000)
[   10.371875] futex hash table entries: 256 (order: 2, 16384 bytes)
[   10.374255] audit: initializing netlink subsys (disabled)
[   10.375382] audit: type=2000 audit(9.625:1): initialized
[   10.377532] Initialise system trusted keyrings
[   10.380871] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[   10.399716] zbud: loaded
[   10.426187] Key type big_key registered
[   11.367643] NET: Registered protocol family 38
[   11.367875] Key type asymmetric registered
[   11.367991] Asymmetric key parser 'x509' registered
[   11.368808] bounce: pool size: 64 pages
[   11.370259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
250)
[   11.370968] io scheduler noop registered
[   11.371088] io scheduler deadline registered
[   11.373616] io scheduler cfq registered (default)
[   11.392473] pl061_gpio 9030000.pl061: PL061 GPIO chip @0x09030000 registered
[   11.394530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.394741] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   11.396912] OF: PCI: host bridge /pcie@10000000 ranges:
[   11.397570] OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
[   11.398041] OF: PCI:   MEM 0x10000000..0x3efeffff -> 0x10000000
[   11.398219] OF: PCI:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
[   11.400665] pci-host-generic 3f000000.pcie: ECAM at [mem 
0x3f000000-0x3fffffff] for [bus 00-0f]
[   11.402096] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[   11.402405] pci_bus 0000:00: root bus resource [bus 00-0f]
[   11.402588] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[   11.402741] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[   11.405551] PCI: bus0: Fast back to back transfers disabled
[   11.411997] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[   11.433637] Serial: AMBA driver
[   11.435933] msm_serial: driver initialized
[   11.444158] libphy: Fixed MDIO Bus: probed
[   11.445492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.445709] ehci-pci: EHCI PCI platform driver
[   11.446014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.446200] ohci-pci: OHCI PCI platform driver
[   11.446479] uhci_hcd: USB Universal Host Controller Interface driver
[   11.448474] usbcore: registered new interface driver usbserial
[   11.448783] usbcore: registered new interface driver usbserial_generic
[   11.449093] usbserial: USB Serial support registered for generic
[   11.450052] mousedev: PS/2 mouse device common for all mice
[   11.454175] rtc-pl031 9010000.pl031: rtc core: registered pl031 as rtc0
[   11.462338] device-mapper: uevent: version 1.0.3
[   11.465750] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: 
dm-de...@redhat.com
[   11.471179] ledtrig-cpu: registered to indicate activity on CPUs
[   11.472040] hidraw: raw HID events driver (C) Jiri Kosina
[   11.472803] usbcore: registered new interface driver usbhid
[   11.472935] usbhid: USB HID core driver
[   11.478789] drop_monitor: Initializing network drop monitor service
[   11.479938] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.481135] Initializing XFRM netlink socket
[   11.489469] NET: Registered protocol family 10
[   11.500707] mip6: Mobile IPv6
[   11.501034] NET: Registered protocol family 17
[   11.501795] ThumbEE CPU extension supported.
[   11.502006] Registering SWP/SWPB emulation handler
[   11.505597] registered taskstats version 1
[   11.505918] Loading compiled-in X.509 certificates
[   11.601267] alg: No test for pkcs1pad(rsa,sha256) 
(pkcs1pad(rsa-generic,sha256))
[   11.614613] Loaded X.509 cert 'Fedora kernel signing key: 
9232fac7fb334580a05d0c180d17bd8231bd1ecf'
[   11.616398] zswap: loaded using pool lzo/zbud
[   11.806163] rtc-pl031 9010000.pl031: setting system clock to 2016-12-01 
14:49:22 UTC (1480603762)
[   11.807130] sr_init: No PMIC hook to init smartreflex
[   11.807507] sr_init: platform driver register failed for SR
[   11.810825] uart-pl011 9000000.pl011: no DMA platform data
[   11.826422] Freeing unused kernel memory: 1156K (c0c5b000 - c0d7c000)
[   11.826577] This architecture does not have kernel memory protection.
[   12.185296] random: systemd: uninitialized urandom read (16 bytes read)
[   12.206906] random: systemd: uninitialized urandom read (16 bytes read)
[   12.510752] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   12.517551] systemd[1]: Detected virtualization qemu.
[   12.518088] systemd[1]: Detected architecture arm.
[   12.518662] systemd[1]: Running in initial RAM disk.

Welcome to Fedora 25 (Twenty Five) dracut-044-77.fc25 (Initramfs)!

[   12.526314] systemd[1]: No hostname configured.
[   12.526893] systemd[1]: Set hostname to <localhost>.
[   12.529401] random: systemd: uninitialized urandom read (16 bytes read)
[   12.529992] systemd[1]: Initializing machine ID from random generator.
[   14.296530] random: systemd: uninitialized urandom read (16 bytes read)
[   14.297438] random: systemd: uninitialized urandom read (16 bytes read)
[   14.299201] random: systemd: uninitialized urandom read (16 bytes read)
[   14.334594] random: systemd: uninitialized urandom read (16 bytes read)
[   14.350490] random: systemd: uninitialized urandom read (16 bytes read)
[   14.351612] random: systemd: uninitialized urandom read (16 bytes read)
[   14.359051] random: systemd: uninitialized urandom read (16 bytes read)
[   14.520124] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[   14.530233] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[   14.562335] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Swap.
[  OK  ] Reached target Local File Systems.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket.
         Starting Create list of required st... nodes for the current kernel...
         Starting Journal Service...
         Starting Apply Kernel Variables...
         Starting Setup Virtual Console...
         Starting dracut cmdline hook...
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[   15.528154] audit: type=1130 audit(1480603766.215:2): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Started Apply Kernel Variables.
[   15.624293] audit: type=1130 audit(1480603766.315:3): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Started Setup Virtual Console.
[   15.700556] audit: type=1130 audit(1480603766.390:4): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[   16.494606] audit: type=1130 audit(1480603767.185:5): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Started Journal Service.
[   16.525940] audit: type=1130 audit(1480603767.215:6): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Started dracut cmdline hook.
[   19.424390] audit: type=1130 audit(1480603770.115:7): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting dracut pre-udev hook...
         Starting Open-iSCSI...
[   20.093563] Loading iSCSI transport class v2.0-870.
[  OK  ] Started Open-iSCSI.
[   20.155062] audit: type=1130 audit(1480603770.845:8): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" 
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started dracut pre-udev hook.
[   21.039436] audit: type=1130 audit(1480603771.730:9): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
[   21.391268] audit: type=1130 audit(1480603772.080:10): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting dracut pre-trigger hook...
[  OK  ] Started dracut pre-trigger hook.
[   23.705877] audit: type=1130 audit(1480603774.395:11): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[   26.704146] audit: type=1130 audit(1480603777.395:12): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Reached target Sockets.
         Starting Show Plymouth Boot Screen...
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Screen.
[   27.582858] audit: type=1130 audit(1480603778.270:13): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Reached target Paths.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[  OK  ] Reached target Basic System.
         Mounting Configuration File System...
[  OK  ] Mounted Configuration File System.
[   30.628114] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   32.574460] scsi host0: Virtio SCSI HBA
[   32.629325] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ 
PQ: 0 ANSI: 5
[   33.246631] random: fast init done
[   33.257871] sd 0:0:0:0: [sda] 4253696 512-byte logical blocks: (2.18 GB/2.03 
GiB)
[   33.268080] sd 0:0:0:0: [sda] Write Protect is off
[   33.271049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   33.273829] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   33.297516]  sda: sda1 sda2 sda3 sda4
[   33.330798] sd 0:0:0:0: [sda] Attached SCSI disk
[  OK  ] Found device QEMU_HARDDISK _/.
[  OK  ] Started dracut initqueue hook.
[   34.402160] audit: type=1130 audit(1480603785.090:14): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
         Starting dracut pre-mount hook...
[  OK  ] Reached target Initrd Root Device.
[  OK  ] Started dracut pre-mount hook.
[   35.057376] audit: type=1130 audit(1480603785.745:15): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting File System Check on /dev/disk/by-label/_\x2f...
[  OK  ] Started File System Check on /dev/disk/by-label/_\x2f.
[   35.701969] audit: type=1130 audit(1480603786.390:16): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Mounting /sysroot...
[   36.169836] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: 
(null)
[  OK  ] Mounted /sysroot.
[  OK  ] Reached target Initrd Root File System.
         Starting Reload Configuration from the Real Root...
[  OK  ] Started Reload Configuration from the Real Root.
[   40.003968] audit: type=1130 audit(1480603790.695:17): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[   40.007267] audit: type=1131 audit(1480603790.695:18): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Reached target Initrd File Systems.
[  OK  ] Reached target Initrd Default Target.
         Starting dracut pre-pivot and cleanup hook...
[  OK  ] Started dracut pre-pivot and cleanup hook.
[   41.639178] audit: type=1130 audit(1480603792.330:19): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Starting Cleaning Up and Shutting Down Daemons...
[  OK  ] Stopped target Timers.
         Starting Plymouth switch root service...
[  OK  ] Stopped Cleaning Up and Shutting Down Daemons.
[   42.210883] audit: type=1130 audit(1480603792.900:20): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[   42.211809] audit: type=1131 audit(1480603792.900:21): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Stopped dracut pre-pivot and cleanup hook.
[   42.330695] audit: type=1131 audit(1480603793.020:22): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[   42.395039] audit: type=1130 audit(1480603793.085:23): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[   42.396018] audit: type=1131 audit(1480603793.085:24): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[  OK  ] Stopped dracut pre-mount hook.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
[  OK  ] Stopped dracut initqueue hook.
[   42.489510] audit: type=1130 audit(1480603793.180:25): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
[   42.490440] audit: type=1131 audit(1480603793.180:26): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue 
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? 
res=success'
         Stopping Open-iSCSI...
[  OK  ] Stopped target Initrd Default Target.
[  OK  ] Stopped target Initrd Root Device.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Open-iSCSI iscsiuio Socket.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped udev Coldplug all Devices.
[  OK  ] Stopped dracut pre-trigger hook.
         Stopping udev Kernel Device Manager...
[  OK  ] Stopped target Local File Systems.
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped target Swap.
[  OK  ] Stopped target Slices.
[  OK  ] Stopped udev Kernel Device Manager.
[  OK  ] Started Plymouth switch root service.
[  OK  ] Stopped Open-iSCSI.
[  OK  ] Stopped dracut pre-udev hook.
[  OK  ] Stopped dracut cmdline hook.
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Stopped Create list of required sta...ce nodes for the current kernel.
[  OK  ] Closed udev Kernel Socket.
[  OK  ] Closed udev Control Socket.
         Starting Cleanup udevd DB...
[  OK  ] Started Cleanup udevd DB.
[  OK  ] Reached target Switch Root.
         Starting Switch Root...
[   44.494875] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[   46.379081] systemd: 18 output lines suppressed due to ratelimiting
[   46.603241] audit_printk_skb: 66 callbacks suppressed
[   46.603597] audit: type=1404 audit(1480603797.290:49): enforcing=1 
old_enforcing=0 auid=4294967295 ses=4294967295
[   47.689489] SELinux:  Permission validate_trans in class security not 
defined in policy.
[   47.689854] SELinux:  Permission module_load in class system not defined in 
policy.
[   47.691120] SELinux: the above unknown classes and permissions will be 
allowed
[   47.756368] audit: type=1403 audit(1480603798.445:50): policy loaded 
auid=4294967295 ses=4294967295
[   47.799702] systemd[1]: Successfully loaded SELinux policy in 1.202834s.
[   48.351909] systemd[1]: Relabelled /dev and /run in 406.216ms.

Welcome to Fedora 25 (Twenty Five)!

[   49.356607] random: crng init done
[   51.405376] audit: type=1130 audit(1480603802.095:51): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   51.406657] audit: type=1131 audit(1480603802.095:52): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Stopped Switch Root.
[   51.431028] audit: type=1130 audit(1480603802.120:53): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   51.432020] audit: type=1131 audit(1480603802.120:54): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Stopped Journal Service.
[   51.462458] audit: type=1130 audit(1480603802.150:55): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   51.463901] audit: type=1131 audit(1480603802.155:56): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting Journal Service...
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Stopped target Switch Root.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Stopped File System Check on Root Device.
[   51.737285] audit: type=1130 audit(1480603802.425:57): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   51.748755] audit: type=1131 audit(1480603802.440:58): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Stopped target Initrd File Systems.
[  OK  ] Created slice system-sshd\x2dkeygen.slice.
[   52.009396] audit: type=1305 audit(1480603802.700:59): audit_enabled=1 old=1 
auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
         Mounting POSIX Message Queue File System...
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on LVM2 poll daemon socket.
         Mounting Debug File System...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Stopped target Initrd Root File System.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
         Starting Apply Kernel Variables...
         Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
[  OK  ] Reached target Slices.
[  OK  ] Set up automount Arbitrary Executab...ats File System Automount Point.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on udev Control Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[   54.442847] EXT4-fs (sda4): re-mounted. Opts: (null)
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Started Journal Service.
[   54.538825] audit: type=1130 audit(1480603805.220:60): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[   54.627425] audit: type=1130 audit(1480603805.315:61): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Apply Kernel Variables.
[   54.701245] audit: type=1130 audit(1480603805.390:62): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Remount Root and Kernel File Systems.
[   54.738740] audit: type=1130 audit(1480603805.430:63): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started LVM2 metadata daemon.
[   54.831133] audit: type=1130 audit(1480603805.520:64): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? 
addr=? terminal=? res=success'
         Starting Configure read-only root support...
         Starting Create System Users...
         Starting Rebuild Hardware Database...
         Starting Flush Journal to Persistent Storage...
[   56.550861] systemd-journald[746]: Received request to flush runtime journal 
from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[   56.834040] audit: type=1130 audit(1480603807.525:65): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Create System Users.
[   57.081116] audit: type=1130 audit(1480603807.770:66): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
[   57.220434] audit: type=1130 audit(1480603807.910:67): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? 
addr=? terminal=? res=success'
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Configure read-only root support.
[   57.993112] audit: type=1130 audit(1480603808.680:68): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[   58.669210] audit: type=1130 audit(1480603809.360:69): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Create Static Device Nodes in /dev.
[   58.817069] audit: type=1130 audit(1480603809.505:70): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-tmpfiles-setup-dev comm="systemd" 
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
[   59.844399] audit: type=1130 audit(1480603810.535:71): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Rebuild Hardware Database.
[   63.234010] audit: type=1130 audit(1480603813.925:72): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting udev Coldplug all Devices...
[  OK  ] Started udev Coldplug all Devices.
[   67.045688] audit: type=1130 audit(1480603817.735:73): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting udev Wait for Complete Device Initialization...
[  OK  ] Found device /dev/ttyAMA0.
[   70.599515] physmap_of_versatile: module license 'unspecified' taints kernel.
[   70.599756] Disabling lock debugging due to kernel taint
[   70.600163] physmap_of_versatile: Unknown symbol regmap_write (err 0)
[   70.600369] physmap_of_versatile: Unknown symbol syscon_node_to_regmap (err 
0)
[   70.600570] physmap_of_versatile: Unknown symbol regmap_update_bits_base 
(err 0)
[  OK  ] Found device QEMU_HARDDISK _swap.
[  OK  ] Found device QEMU_HARDDISK _/boot.
         Activating swap /dev/disk/by-uuid/8...a-f84c-4b32-9db2-fd47f9d823e7...
[   76.764388] Adding 249852k swap on /dev/sda3.  Priority:-1 extents:1 
across:249852k FS
[  OK  ] Activated swap /dev/disk/by-uuid/839221ba-f84c-4b32-9db2-fd47f9d823e7.
[  OK  ] Reached target Swap.
[  OK  ] Started udev Wait for Complete Device Initialization.
[   79.037373] audit: type=1130 audit(1480603829.725:74): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting Activation of DM RAID sets...
[  OK  ] Started Activation of DM RAID sets.
[   79.993972] audit: type=1130 audit(1480603830.685:75): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   79.995119] audit: type=1131 audit(1480603830.685:76): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /boot...
[  OK  ] Reached target Encrypted Volumes.
[   80.290235] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
(null)
[  OK  ] Mounted /boot.
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Journal Catalog...
         Starting Import network configuration from initramfs...
         Starting Rebuild Dynamic Linker Cache...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Restore /run/initramfs on shutdown...
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[   81.531956] audit: type=1130 audit(1480603832.220:77): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[   81.533053] audit: type=1131 audit(1480603832.220:78): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Rebuild Journal Catalog.
[   81.670161] audit: type=1130 audit(1480603832.360:79): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-journal-catalog-update comm="systemd" 
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  OK  ] Started Restore /run/initramfs on shutdown.
[   81.812476] audit: type=1130 audit(1480603832.500:80): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Rebuild Dynamic Linker Cache.
[   83.376893] audit: type=1130 audit(1480603834.065:81): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? 
addr=? terminal=? res=success'
         Starting Update is Completed...
[  OK  ] Started Update is Completed.
[   84.010219] audit: type=1130 audit(1480603834.700:82): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
[  OK  ] Started Import network configuration from initramfs.
[   84.189981] audit: type=1130 audit(1480603834.880:83): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[   85.209671] audit: type=1130 audit(1480603835.890:84): pid=1 uid=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 
msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" 
hostname=? addr=? terminal=? res=success'
         Starting Security Auditing Service...
[   85.901832] audit: type=1305 audit(1480603836.590:85): audit_enabled=1 old=1 
auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[   85.909282] audit: type=1305 audit(1480603836.600:86): audit_pid=848 old=0 
auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[  OK  ] Started Security Auditing Service.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Listening on Open-iSCSI iscsid Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started dnf makecache timer.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
         Starting OpenSSH ecdsa Server Key Generation...
         Starting NTP client/server...
         Starting Initial Setup configuration program...
         Starting Login Service...
         Starting OpenSSH ed25519 Server Key Generation...
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
         Starting firewalld - dynamic firewall daemon...
         Starting OpenSSH rsa Server Key Generation...
/usr/lib/python3.5/site-packages/pyanaconda/installclass.py:26: 
PendingDeprecationWarning: the imp module is deprecated in favour of importlib; 
see the module's documentation for alternative uses
  import imp
[  124.034961] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  126.003630] Ebtables v2.0 registered
[  128.410914] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  135.232959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  138.671235] bridge: automatic filtering via arp/ip/ip6tables has been 
deprecated. Update your scripts to load br_netfilter if you need this.
[  141.658799] Netfilter messages via NETLINK v0.30.
[  142.030291] ip_set: protocol 6
================================================================================
================================================================================
Initial setup of Fedora 25 (Twenty Five)

 1) [x] Language settings                 2) [!] Time settings
        (English (United States))                (Timezone is not set.)
 3) [x] Network configuration             4) [!] Root password
        (Wired (eth0) connected)                 (Password is not set.)
 5) [!] User creation
        (No user will be created)
  Please make your choice from above ['q' to quit | 'c' to continue |
  'r' to refresh]: 

_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org

Reply via email to