Does the xfs_growfs not do that?

The process on the wiki page only has the resize process.

Thanks,

Rafael
On Wed, Apr 5, 2017 at 6:35 AM Peter Robinson <[email protected]> wrote:

> On Tue, Apr 4, 2017 at 2:18 AM, Rafael Leiva-Ochoa <[email protected]>
> wrote:
> > Hi Everyone,
> >
> >      I have a Raspberry Pi 3 running a 64GB card. After installing
> Fedora 25
> > Server, I tried using the xfs_growfs command to enlarge the partition.
> But,
> > it does not work. I have done this before on my other Pi's with no
> problems.
> > Restarting did not help. Any ideas?
>
> Did you expand the partition first?
>
> PS re-forwarding the same email is not useful, you'll likely just get
> more ignored next time!
>
> > Here is the out of my Pi:
> >
> > [root@localhost ~]# df -H
> >
> > Filesystem      Size  Used Avail Use% Mounted on
> >
> > devtmpfs        451M     0  451M   0% /dev
> >
> > tmpfs           509M   13k  509M   1% /dev/shm
> >
> > tmpfs           509M  435k  509M   1% /run
> >
> > tmpfs           509M     0  509M   0% /sys/fs/cgroup
> >
> > /dev/mmcblk0p4  3.0G  2.1G  965M  68% /
> >
> > /dev/mmcblk0p2  479M  321M  144M  70% /boot
> >
> > tmpfs           102M     0  102M   0% /run/user/0
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# lsblk
> >
> > NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
> >
> > mmcblk0     179:0    0 59.5G  0 disk
> >
> > ├─mmcblk0p4 179:4    0  2.8G  0 part /
> >
> > ├─mmcblk0p2 179:2    0  488M  0 part /boot
> >
> > ├─mmcblk0p3 179:3    0  488M  0 part [SWAP]
> >
> > └─mmcblk0p1 179:1    0   29M  0 part
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# xfs_growfs /dev/mmcblk0p4
> >
> > meta-data=/dev/mmcblk0p4         isize=512    agcount=4, agsize=183104
> blks
> >
> >          =                       sectsz=512   attr=2, projid32bit=1
> >
> >          =                       crc=1        finobt=1 spinodes=0
> rmapbt=0
> >
> >          =                       reflink=0
> >
> > data     =                       bsize=4096   blocks=732416, imaxpct=25
> >
> >          =                       sunit=0      swidth=0 blks
> >
> > naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
> >
> > log      =internal               bsize=4096   blocks=2560, version=2
> >
> >          =                       sectsz=512   sunit=0 blks, lazy-count=1
> >
> > realtime =none                   extsz=4096   blocks=0, rtextents=0
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# df -H
> >
> > Filesystem      Size  Used Avail Use% Mounted on
> >
> > devtmpfs        451M     0  451M   0% /dev
> >
> > tmpfs           509M   13k  509M   1% /dev/shm
> >
> > tmpfs           509M  435k  509M   1% /run
> >
> > tmpfs           509M     0  509M   0% /sys/fs/cgroup
> >
> > /dev/mmcblk0p4  3.0G  2.1G  965M  68% /
> >
> > /dev/mmcblk0p2  479M  321M  144M  70% /boot
> >
> > tmpfs           102M     0  102M   0% /run/user/0
> >
> > [root@localhost ~]#
> >
> >
> > Thanks,
> >
> >
> > Rafael
> >
> >
> > _______________________________________________
> > arm mailing list -- [email protected]
> > To unsubscribe send an email to [email protected]
> >
>
_______________________________________________
arm mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to