Hello Paul,

I'm not getting any output from the Odroid serial port, even from u-boot.bin. How can I tell if the issue is from u-boot.bin or after? Also, has the initial-setup issue fixed and is it available in the current image download for the F26 spins?


Stewart

On 08/09/2017 12:57 PM, Paul Whalen wrote:
Hi Stewart,

----- Original Message -----
Hello Andreas,

I have been away for awhile as my wife and I relocated from the East
Coast of the U.S. to Oregon.  Now that we are settling in a bit, I am
once again finding some time to work on my Odroid XU4.

I hope all is well with you.  I see you have been working hard on trying
to get the Odroid working with Fedora 26.
I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
initial-setup (missing serial console ttySAC2), but otherwise it worked
quite well. Its not the same board, but the kernel *should* work.

I have been periodically trying new versions of Fedora since Fedora 24
kernel 4.6.5-300.fc24, including Fedora 26.  Something broke after the
4.6.5-300.fc24 release.  I cannot tell if the problem lies in the newer
u-boot.bin or elsewhere.  After the system got broken, I no longer get
any output though the serial cable to determine where such problems
lie.  However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
everything works fine.  I get output through the serial cable and the
system boots up beautifully.

is it possible for you to email me a zipped copy of the u-boot.bin file
you are using to boot?  Is it the 4.6.5-300.fc24 version?

Thanks.

       Kind regards,
       Stewart


On 07/25/2017 12:17 AM, arm...@rirasoft.de wrote:
Hi there,

I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
(UAS)) is working with kernel 4.6.5-300.fc24.


[root@myodroid ~]# lsusb -d 152d:0561
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
USA Technology Corp.
[root@myodroid ~]#

Next steps to do:

- move OS from SD-Card to more faster eMMC-Card. How to do it?
- Kernel update to actual version. I've update Kernel to
4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
the first part of kernel is booting; then it stops.
- compiling modules to activate the color LCD

Is there anybody who can help me with the first 2 steps ?


Thanks
Andreas
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org

_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org

Reply via email to