----- Original Message -----
> Indeed, adding "console=tty0 console=ttyS1,115200" to the append line in
> extlinux.conf, now the serial connection works.
> But initial-setup, even if the answers appears in the serial interface,
> doesn't work: in reality there is a login screen.
> Here you can find a screencast to better understand:
> https://alciregi.fedorapeople.org/webm/rpi3serial.webm
> Using the hdmi monitor and the keyboard, initial setup works.

Thanks for all the testing Alessio!

With our Beta release already delayed, I think we need to document using 
the display to configure initial setup for the Raspberry Pi 3 (which is 
what most users will do) and get this fixed for final. 

Initial-setup over serial works on all other hardware tested.

Paul

> Ciao
> 
> 2017-09-26 19:48 GMT+02:00 Peter Robinson < [email protected] > :
> 
> 
> On Tue, Sep 26, 2017 at 6:03 PM, Alessio Ciregia < [email protected] >
> wrote:
> > Someone has tested the latest RC of the Minimal image on the RPi3 using the
> > serial console?
> > Maybe I'm wrong, but it doesn't work as in previous composes was. It stops
> > printing on the serial console as soon as the kernel is loaded. The append
> > line in the extlinux.conf file seems ok.
> 
> There was a change/regression where you need to specify ttyS1 for the
> console, not S0, I believe it should work fine for that, I think I
> know what the issue is but I'm traveling this week in endless meetings
> so I've not had time to verify my theory as to why that is
> 
> > Tomorrow I will try again. In the meanwhile could someone confirm that it
> > works?
> > 
> > Thanks
> > A.
> > 
> > _______________________________________________
> > arm mailing list -- [email protected]
> > To unsubscribe send an email to [email protected]
> > 
> 
> 
> _______________________________________________
> arm mailing list -- [email protected]
> To unsubscribe send an email to [email protected]
> 
_______________________________________________
arm mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to