On Mon, Mar 12, 2018 at 10:47 PM, sakurai <saku...@pugpug.org> wrote:
> Hi Peter,
>
> Thank you for your prompt comment.
> I removed uEnv.txt but following message was displayed.
>
> gpio: pin 53 (gpio 53) value is 1
> mmc0 is current device
> micro SD card found
> mmc0 is current device
> gpio: pin 54 (gpio 54) value is 1
> SD/MMC found on device 0
> reading uEnv.txt
> ** Unable to read file uEnv.txt **
> gpio: pin 55 (gpio 55) value is 1
> ** File not found /boot/uImage *

I don't know what you've done to now, you're likely possibly better
off starting again with arm-image-installer to setup the image again
with am335x_evm and then try booting with the boot button held down.

You might also want to give the full output.

PS please next time also don't hijack a thread but instead start a new
mailing list thread, I nearly didn't notice this as it's _COMPLETELY_
unrelated to a odroid device.


> 2018-03-13 7:31 GMT+09:00 Peter Robinson <pbrobin...@gmail.com>:
>> On Mon, Mar 12, 2018 at 9:47 PM, sakurai <saku...@pugpug.org> wrote:
>>> Hi Dennis,
>>>
>>> 2018-03-13 3:52 GMT+09:00 Dennis Gilmore <den...@ausil.us>:
>>>> El lun, 12-03-2018 a las 07:01 +0900, sakurai escribió:
>>>>> Hi.
>>>>>
>>>>> Has anyone already suceeded to install ARM Fedora 27 on the beagle
>>>>> bone black?
>>>>> If so, would you kindly provide a pointer?
>>>>> I have tried to install it using --target=am335x_boneblack but
>>>>> failed.
>>>>> It seems there is
>>>>> not uEnv.txt installed. Moreover, though the installer seems to do dd
>>>>> for MLO as well as
>>>>> u-boot.img, there is no such file in the first FAT partition. That is
>>>>> why I copied them from
>>>>> the fourth partition.
>>>>>
>>>>
>>>> the BBB ships witha u-boot installed on the internal emmc  you will
>>>> need to hold down the boot button to have it boot from your sdcard if
>>>> you set up one externally, once the system is booted you will need to
>>>> update the internal u-boot in order to not need to press the boot
>>>> button.
>>>
>>> I might have done this as Ubuntu can boot without a pressing the boot
>>> button.
>>>
>>>>  you can copy the u-boot.img and MLO files to the vfat
>>>> partition, or you can use the update-uboot tool to install the files
>>>> into the emmc. The SOC looks for the files in raw disk space before
>>>> looking in a vfat partition
>>>
>>> I see. In any case, I do not find any uEnv.txt in my SD card just after the
>>> installation process. Then I made uEnv.txt, and the message said 'File not
>>> found /boot/uImage'. It seems that the SD card is not correctly mounted, 
>>> though
>>> 'ext2ls mmc 0:2' shows uImage after failed boot. Here is the log after
>>> first LED on.
>>
>> Fedora doesn't use either uEnv.txt or uImage* for kernels etc so that
>> would be expected.
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org

Reply via email to