El dom, 14-10-2018 a las 16:24 +0200, Torbjorn Jansson escribió: > Hello > > for a while now i have been struggling to create a set of steps to > make a > successfully bootable fedora 28 image for my odroid hc2 computers. > > the reason for this is several, but main one is to have all gluster > related > packaged available like the samba vfs modules and iscsi related > packages for > gluster that is missing from the ubuntu images. > plus i prefer fedora. > > all i get is a sd card that boots but then hangs on initial setup and > if i try > to work around that by disabling it then boot takes maybe 5-10 > minutes at least > with failing services (probably those that depend on network) and > when i > finally get to a login prompt root doesn't work > > > here is my step by step instructions so far that's not quite working: > (this is done from a fedora 28 host) > > 1: first install needed packages > dnf install arm-image-installer-2.5-1.fc28.noarch > dnf install uboot-images-armv7-2018.03-6.fc28.noarch > > 2: get image and install it to sd card > fedora-arm-image-installer --target=none > --image=Fedora-Minimal-armhfp-28-1.1-sda.raw.xz --resizefs -- > norootpass > --media=/dev/sdf --args "rd.driver.pre=ledtrig-heartbeat,xhci-plat- > hcd > cpuidle.off=1 no_bL_switcher console=tty1 console=ttySAC2,115200n8"
given the hardware you will not want a console on tty1 and being first it is likely where initial-setup is being run Dennis > (sdf in this case is my sd card) > > 3: fix the missing dtb file > mkdir /tmp/sd > mount -t auto /dev/sdf2 /tmp/sd > cd /tmp/sd/dtb > ln -s exynos5422-odroidxu4.dtb exynos5422-odroidunknown.dtb > umount /tmp/sd > > 4: make it boot by running sd_fusing > mkdir sd_fusing; cd sd_fusing > wget > https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/sd_fusing.sh > > \ > https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/bl1.bin.hardkernel > > \ > https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/bl2.bin.hardkernel.720k_uboot > > \ > https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/tzsw.bin.hardkernel > > chmod a+x sd_fusing.sh > cp /usr/share/uboot/odroid-xu3/u-boot.bin . > > ./sd_fusing.sh /dev/sdf > > > ok so now comes the problems > at this stage i have a bootable image but it gets stuck, most likely > on initial > setup that never shows up. > the thing is, it is not locked up because if i plug in an usb device > i get a > few lines on the serial console so kernel is still working but boot > is stuck. > > last few lines on serial console is something like: > Starting firewalld - dynamic firewall daemon... > Starting Initial Setup configuration program... > then some stuff related to usb & my disk > then on first boot a few lines related to OpenSSH key generation > rebooting hangs at same place with exception of SSH keys. > > to get a bit further i can mount the root filesystem manually on my > other > computer and remove the following two files: > rm /etc/systemd/system/graphical.target.wants/initial-setup.service > rm /etc/systemd/system/multi-user.target.wants/initial-setup.service > > this gets rid of the initial setup but then i get a whole bunch of > services > failing and boot being really really slow, it takes probably 10-15 > minutes for > everything to time out and get to the logon prompt. > when i get it root doesn't work. > > this is where i kind of gave up. > i know i somehow managed to get a bootable image several months ago, > but i'm > not sure if i then had to manually set root password by editing > passwd or > shadow before trying to boot. > > things on my wish list for this board: > > easier installation and updated packages that work. > for example arm-image-installer with a board definition for odroid. > may be usefull even if we have to run sd_fusing manualy after anyway, > possibly > with a text saying so. > this also would help to make --addconsole work > > uboot that recognized hc2 so it loads the right file > dtb file for hc2, one that works and is appropriate. > _______________________________________________ > arm mailing list -- [email protected] > To unsubscribe send an email to [email protected] > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: > https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/[email protected]
signature.asc
Description: This is a digitally signed message part
_______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
