$ sudo arm-image-installer --image=Fedora-Xfce-armhfp-29-1.2-sda.raw.xz --target=orangepi_prime --media=/dev/sdc
I got ===================================================== = Selected Image: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = Selected Media : /dev/sdc = U-Boot Target : orangepi_prime ===================================================== ***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** ***************************************************** Type 'YES' to proceed, anything else to exit now = Proceed? yes = Writing: = Fedora-Xfce-armhfp-29-1.2-sda.raw.xz = To: /dev/sdc .... 0+638450 records in 0+638450 records out 5549064192 bytes (5.5 GB, 5.2 GiB) copied, 1994.96 s, 2.8 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/sunxi-spl.bin': No such file or directory = Writing u-boot FIT image for orangepi_prime .... dd: failed to open '/tmp/root/usr/share/uboot/orangepi_prime/u-boot.itb': No such file or directory = Installation Complete! Insert into the orangepi_prime and boot. TIA I hope hope this helps note: I have been able to get my RPI 3 Model B running from this Fedora-Xfce-armhfp-29-1.2-sda.raw.xz _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
