Hi, OK, my issue was a "glitch in the matrix". I retried with another sd-card (Kingston 8GB) and it now just works! My use case is server only, so I will not test any desktop stuff.
- Fred On Sat, Apr 4, 2020 at 1:46 AM Thomas H.P. Andersen <[email protected]> wrote: > > > On Fri, Apr 3, 2020 at 6:13 PM Stefan Wahren <[email protected]> > wrote: > >> Hi Fred, >> >> Am 03.04.20 um 13:10 schrieb Fred van Zwieten: >> > I haven't retried it yet, but I do have some extra info on my previous >> > (and failed) attempt: >> > >> > I used arm-image-installer as the tool. As it does not yet have a rpi4 >> > target, I used the rpi3 value. It does boot, but, like I said, it >> > hangs in a later stage. I will provide screenshots when I am able to >> > test again. >> > >> > This is the (relevant) output from /proc/cpuinfo: >> > Hardware : BCM2835 >> > Revision : c03111 >> > Serial : 1000000094b1358a >> > Model : Raspberry Pi 4 Model B Rev 1.1 >> >> this should work with Linux 5.6. So i don't have an idea what's the >> problem here. >> > > I have the exact same model/revision (confirmed with /proc/cpuinfo when > booting raspbian) and mine boots without problems. > > These are the steps I did to get it to boot to gnome-shell: > > Wrote Fedora-Minimal-32-20200328.n.0.aarch64.raw.xz (latest compose from > koji at the time) with arm-image-installer to the sd. > Resized partion. > Booted and set up users etc. > > Once booted I ran: > # dnf update > # dnf install fedora-release-workstation-32 --allowerasing > # dnf group install workstation-product > # dnf install bash-completion > > and then after a reboot: > # systemctl start graphical.target > > This got me a gnome-shell (on llvmipe obviously, but it is usable) > > >> Rev 1.2 needs recent changes to sdhci-iproc and the devicetree. >> >> Best regards >> Stefan >> >> > >> > - Fred >> > >> > On Fri, Apr 3, 2020 at 12:25 PM Andreas Reschke <[email protected] >> > <mailto:[email protected]>> wrote: >> > >> > Hello Dirk, >> > >> > I've tried it with balenaEtcher: It works !! >> > >> > Thank you for that tip !! >> > >> > Andreas >> > >> > PS: I dind't know why it not works with xzcat and dd but now I have >> a >> > working method. >> > >> > Am 03.04.20 um 10:23 schrieb Dirk Streubel: >> > >> Hello together, >> > >> >> > >> Hello Dirk >> > >> >> > >> how did you you install >> > Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz on SD-Card? >> > >> >> > >> Just xzcat Fedora-Minimal-32_Beta-1.2.aarch64.raw.xz | dd >> > of=/dev/sdc status=progress bs=4M >> > >> >> > >> didn't work for me. All I get is a dracut shell >> > >> >> > >> >> > >> Thanks >> > >> >> > >> Andreas >> > > Hello Andreas, >> > > >> > > yes, i installed the two Version yesterday on a 64 GB SD Card. >> > > >> > > Image has been unpacked with all necessary tools. >> > > >> > > For installation on the SD Card i use balenaEtcher. That Program >> > works fine here. >> > > >> > > Dirk >> > > >> > > >> > > >> > > >> > > >> > >> _______________________________________________ >> > >> arm mailing list -- [email protected] >> > <mailto:[email protected]> >> > >> To unsubscribe send an email to >> > [email protected] >> > <mailto:[email protected]> >> > >> Fedora Code of Conduct: >> > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> > >> List Guidelines: >> > https://fedoraproject.org/wiki/Mailing_list_guidelines >> > >> List Archives: >> > >> https://lists.fedoraproject.org/archives/list/[email protected] >> > > _______________________________________________ >> > > arm mailing list -- [email protected] >> > <mailto:[email protected]> >> > > To unsubscribe send an email to >> > [email protected] >> > <mailto:[email protected]> >> > > Fedora Code of Conduct: >> > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> > > List Guidelines: >> > https://fedoraproject.org/wiki/Mailing_list_guidelines >> > > List Archives: >> > >> https://lists.fedoraproject.org/archives/list/[email protected] >> > _______________________________________________ >> > arm mailing list -- [email protected] >> > <mailto:[email protected]> >> > To unsubscribe send an email to [email protected] >> > <mailto:[email protected]> >> > Fedora Code of Conduct: >> > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> > List Guidelines: >> > https://fedoraproject.org/wiki/Mailing_list_guidelines >> > List Archives: >> > >> https://lists.fedoraproject.org/archives/list/[email protected] >> > >> > >> > _______________________________________________ >> > arm mailing list -- [email protected] >> > To unsubscribe send an email to [email protected] >> > Fedora Code of Conduct: >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> > List Archives: >> https://lists.fedoraproject.org/archives/list/[email protected] >> _______________________________________________ >> arm mailing list -- [email protected] >> To unsubscribe send an email to [email protected] >> Fedora Code of Conduct: >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives: >> https://lists.fedoraproject.org/archives/list/[email protected] >> >
_______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
