Hi Ben, > I've been trying without success to get the F32 Workstation RC1.6 (tomorrow's > release) installed on my Pinebook Pro. If anyone here has done it, do you > have instructions written up somewhere?
I have done it but it's all from serial console so it doesn't make it an overly useful device. > One layer of trouble I've had is that the image apparently doesn't have the > uboot files. The arm-image-installer script looks for them, AFAICT, in the > image, so I called the installer with the PREFIX set to '', which was enough > to get the install script to work, but the PBP doesn't boot from the SD card. The 1.6 release actually does have the uboot files, it's called pinebook-pro-rk3399, but we're going to need to flash it slightly differently. > I also used the 'rock64' target, which seems like it should be the right > answer and not 'pinebook' (since the Pinebook uses a different board from the > Pinebook Pro). But maybe that's part of my problem, too? It's not, the options are extremely device specific. To summarise where we are for everyone, with other deadlines I ran out of time to really polish this for F-32, it does actually boot on Fedora 32 but there's an issue with display output I've not got to the bottom of as yet. I'm hoping to catch up and I'll do a remix image with the fixes in so people can consume it easily. Once the screen is working any further enhancements we deliver in F-32 can be provided simply by the usual update mechanisms. Peter _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
