To flash SPI rom a running os on Pinebook Pro you can flash SPI like this: Writing to SPI Flash: # flash_erase /dev/mtd0 0 0 # dd if=spiflash.bin of=/dev/mtd0
If dd doesn't work for you (see #2), try nandwrite: # nandwrite -p /dev/mtd0 spiflash.bin You can get flash_erase and nandwrite by installing mtd-utils package. Warning! If somthing go wrong with flashing, you need to short circut the SPI to get it reset. Make sure you flash_erase before trying to write to SPI, I missed that a couple of times and I ended up with corrupt SPI and had to short circut. As far as I have tried the Fedora Kernel can not start the disply on Pinebook Pro. You can only get output on serial over UART. _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected] Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
