> Am 04.09.2022 um 23:21 schrieb Peter Robinson <pbrobin...@gmail.com>: > >>>> Before that I got the EFI screen and could select a kernel, but the >>>> keyboard is not initialised so the system does respond to the cursor keys >>>> at all. >>> >>> Is it the firmware shipped by Fedora or does it come from elsewhere? >> >> Fedora doesn’t include a spi Version, so I used spi firmware from Armbian >> late 2020, which is according to Arabian docu mainline U-Boot. And >> everything worked since then. > > So Fedora doesn't include a SPI version of it because neither of the > Rock Pi 4 devices, rock-pi-4-rk3399 and rock-pi-4c-rk3399, have > support for SPI in upstream U-Boot even with upstream master ATM. I > have neither of those devices so I can't test any patches I could do > to be able to send that support upstream.
So the Armbian docu pretends something that doesn’t exist - not nice. > >> But when the kernel issue arises, the system is already running from NVMe >> device, isn’t it? > > It could be because something had changed in the firmware and the > kernel isn't powering up a regulator that is needed by PCI or similar > that was previously powered up by firmware. > >>> Which model of Rock Pi 4 is it? >> It is the Rock Pi 4a (without wifi), Board revision 1.4 which is the first >> revision with a soldered SPI module. >> >> >>> Do you get all the early displayoutput? >> >> I get after the update the same output as with the installation kernel. That >> is the EFI selection screen, the the display goes blank so some seconds, >> then the online message in the first line „BootingFedora …, then the display >> goes blank again for some seconds, and the output as I wrote in my previous >> mail. The keyboard is with both kernels not operational when the EDI screen >> is displayed. > > So you get output from U-Boot before you get a grub menu? If so what > version string does the Armbian firmware return? It says: U-Boot 2020.10 - Armbian May 06 2011 > I may have found something, but I'm still bisecting some pieces down. Gives ma hope. Peter _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue