Hi Jimmy, > -----Original Message----- > From: [email protected] > <[email protected]> > Sent: 11 March 2021 12:39 > To: [email protected] > Subject: Testing Leap 15.3 on a Raspi4 > > Greetings, > > I wrote a post on the blog of our association yesterday regarding the Beta > that > came out on the 3rd March. > > I grabbed the ISO and burnt it to a USB key with Etcher. > > Could not get it to boot as per https://en.opensuse.org/HCL:AArch64_EFI so > went into the process via Raspbian to update eeprom: > > sudo rpi-eeprom-update -d -f > /lib/firmware/raspberrypi/bootloader/latest/pieeprom-2021-02-16.bin > > OK, update went fine and checked with: > > vcgencmd bootloader_version > > Now, it appears that there might be some more steps, I also used RASPI-CONFIG > to set boot order with USB as priority instead of SD.
I did not try to boot the ISO on Raspberry Pi yet. But that should work since the ISO should be a hybrid ISO, able to boot on Raspberry Pi 3/4. > > Has someone created a RASPI4 image by any chance please? The official Raspberry Pi image (for RPi3 and RPi4) for upcoming Leap 15.3 is available here: http://download.opensuse.org/distribution/leap/15.3/appliances/openSUSE-Leap-15.3-ARM-JeOS-raspberrypi.aarch64.raw.xz Cheers, Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
