Hi, > -----Original Message----- > From: Rudloff <[email protected]> > Sent: 22 May 2021 02:44 > To: [email protected] > Subject: RE: openSUSE-Tumbleweed-ARM-JeOS-rockpro64.aarch64-2021.05.17- > Build5.5 does not finish booting > > I tested it again. Same result. But the rockpi4 image boots my rockpro64. But > on
That's unexpected that image for rockpi4 boots on the rockpro64 board, but image for rockpro64 does not boot properly on the rockpro64 board... > both boards there is no video output. Now I found that there is a rockpro64v2 > DTB and my board is a V2. The only diff between V1 and V2 seems to be the audio codec setup. So, I suspect this does not prevent the board to boot. > > And there seems to be a better DTB for the V1.4 rockpi. > > Where is the setting which DTB to use. Is there a chart where the things are > stored? It is anoying searching the information if one does not know what to > search for. You can update the DTB file that u-boot loads, by interrupting the auto-boot and setting the DTB file in u-boot. (you likely need a serial for that). Guillaume IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
