Am Samstag, 26. März 2022, 13:10:08 CEST schrieb Stefan Seyfried: > On 26.03.22 09:31, Axel Braun wrote: ... > > This command does not exist in openSUSE - anyone knows which to use > > instead? > Just boot a raspi-OS SD Card once and do the firmware-update / boot > config from there ;-)
Well, even that did not work as expected: I got the actual Raspian OS and tried echo program_usb_boot_mode=1 | sudo tee -a /boot/config.txt first - No boot from USB Next I found that sudo -E rpi-eeprom-config -e allows you to change the boot order as documented here [1] - note this works from a running openSUSE system as well! I set this to 0x3 (USB Boot), which was an unlucky choice, and ended up in a red and green LED lit permanently - and nothing more happening. Finally I used the rpi-imager to write a little SD card with the USB Bootloader....that worked. BOOT_ORDER=0xf14 is now set. I have adapted the Wiki accordingly. Cheers Axel [1] https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-4-bootloader-configuration
