have you tried
$ stty erase ^?

where ^? is the actual characters '^' and '?'

I have an issue where backspace shows instead of deleting a char, and
that command fixes it for me

~fire
[email protected]

On Tue, Aug 16, 2016 at 6:42 AM, Tuyosi Takesima
<[email protected]> wrote:
> hi all .
> i try 2016-08-15 19:50  miniroot-panda-60.fs .
>
> but
> --
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> --
> appear ?
> how to cope with it ?
>
>
> i paste all .
> ------------>
> boot>
> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2157352+7967508+428548 [64+307696+150789]=0xa81dc4
>
> OpenBSD/armv7 booting ...
> arg0 0x80000000 arg1 0xae7 arg2 0x88000000
> Allocating page tables
> freestart = 0x80d82000, free_pages = 258686 (0x0003f27e)
> IRQ stack: p0x80db0000 v0xc0db0000
> ABT stack: p0x80db1000 v0xc0db1000
> UND stack: p0x80db2000 v0xc0db2000
> SVC stack: p0x80db3000 v0xc0db3000
> Creating L1 page table at 0x80d84000
> Mapping kernel
> Constructing L2 page tables
> undefined page pmap board type: 2791
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights
> reserved.
> Copyright (c) 1995-2016 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 6.0-current (RAMDISK) #7: Mon Aug 15 19:49:23 MDT 2016
>     [email protected]:/usr/src/sys/arch/armv7/compile/RAMDISK
> real mem  = 1073741824 (1024MB)
> avail mem = 1038680064 (990MB)
> mainbus0 at root: TI OMAP4 PandaBoard
> cpu0 at mainbus0: ARM Cortex A9 R1 rev 2 (ARMv7 core)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(32b/l,4way) I-cache, 32KB(32b/l,4way) wr-back D-cache
> cortex0 at mainbus0
> amptimer0 at cortex0: tick rate 396000 KHz
> armliicc0 at cortex0: rtl 4 waymask: 0x0000000f
> omap0 at mainbus0
> omapid0 at omap0: omap4430
> amptimer0: adjusting clock: new tick rate 400000 KHz
> prcm0 at omap0 rev 0.0
> ampintc0 at mainbus0 nirq 160
> simplebus0 at mainbus0: "ocp"
> simplebus1 at simplebus0: "l4"
> simplebus2 at simplebus1: "scm"
> simplebus3 at simplebus1: "scm"
> simplebus4 at simplebus3: "omap4_padconf_global"
> simplebus5 at simplebus1: "l4"
> omgpio0 at simplebus0: rev 0.1
> gpio0 at omgpio0: 32 pins
> omgpio1 at simplebus0: rev 0.1
> gpio1 at omgpio1: 32 pins
> omgpio2 at simplebus0: rev 0.1
> gpio2 at omgpio2: 32 pins
> omgpio3 at simplebus0: rev 0.1
> gpio3 at omgpio3: 32 pins
> omgpio4 at simplebus0: rev 0.1
> gpio4 at omgpio4: 32 pins
> omgpio5 at simplebus0: rev 0.1
> gpio5 at omgpio5: 32 pins
> com0 at simplebus0: ti16750, 64 byte fifo
> com0: probed fifo depth: 0 bytes
> com1 at simplebus0: ti16750, 64 byte fifo
> com1: probed fifo depth: 0 bytes
> com2 at simplebus0: ti16750, 64 byte fifo
> com2: console
> com3 at simplebus0: ti16750, 64 byte fifo
> com3: probed fifo depth: 0 bytes
> tiiic0 at simplebus0 rev 0.10
> iic0 at tiiic0
> "ti,twl6030" at iic0 addr 0x48 not configured
> "ti,twl6040" at iic0 addr 0x4b not configured
> tiiic1 at simplebus0 rev 0.10
> iic1 at tiiic1
> tiiic2 at simplebus0 rev 0.10
> iic2 at tiiic2
> "ti,eeprom" at iic2 addr 0x50 not configured
> tiiic3 at simplebus0 rev 0.10
> iic3 at tiiic3
> ommmc0 at simplebus0
> sdmmc0 at ommmc0: 1-bit, mmc high-speed
> ommmc1 at simplebus0
> sdmmc1 at ommmc1: 1-bit
> omdog0 at simplebus0 rev 0.0
> omehci0 at simplebus0
> usb0 at omehci0: USB revision 2.0
> uhub0 at usb0 "TI OMAP EHCI root hub" rev 2.00/1.00 addr 1
> sdmmc1: can't supply clock
> sdmmc1: can't enable card
> uhub1 at uhub0 port 1 "Standard Microsystems product 0x9514" rev
> 2.00/2.00 addr 2
> smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems
> SMSC9512/14" rev 2.00/2.00 addr 3
> smsc0: address ff:ff:ff:ff:ff:ff
> ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x0001f0, model 0x000c
> sdmmc0: can't enable card
> boot device: lookup 'sd0a:/bsd' failed.
> root on rd0a swap on rd0b dump on rd0b
> WARNING: CHECK AND RESET THE DATE!
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> ------------<
>
> regards



-- 
fire crow : [email protected] +1.917.306.9451

Reply via email to