Seems the latest arm64 snapshot miniroot66.fs doesn't go into single user, first kernel that seem to broke is from: Sun Feb 2 02:14:44 MST 2020, last working from: Fri Jan 31 21:54:51 MST 2020
every second it writes: init: single user shell terminated, restarting miniroot66.fs retrieved from archive from https://ftp.hostserver.de/archive/ The output from last working miniroot66.fs: Scanning mmc 1:1... 33543 bytes read in 8 ms (4 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi Scanning disk [email protected]... ** Unrecognized filesystem type ** Card did not respond to voltage select! Scanning disk [email protected]... Disk [email protected] not ready Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 165151 bytes read in 14 ms (11.2 MiB/s) disks: sd0* >> OpenBSD/arm64 BOOTAA64 0.20 boot> cannot open sd0a:/etc/random.seed: No such file or directory booting sd0a:/bsd: 2233624+626496+8770856+741272 [181074+109+524304+202392]=0xff02f0 type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8 type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8 type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8 type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8 type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8 type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8 type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8 type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8 type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8 type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8 type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8 type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8 type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008 type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8 type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8 type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8 type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8 type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008 type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8 type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8 type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008 type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.6-current (RAMDISK) #422: Fri Jan 31 21:54:51 MST 2020 [email protected]:/usr/src/sys/arch/arm64/compile/RAMDISK real mem = 2079993856 (1983MB) avail mem = 1983299584 (1891MB) mainbus0 at root: Pine64 Rock64 cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu0: 256KB 64b/line 16-way L2 cache efi0 at mainbus0: UEFI 2.8 efi0: Das U-Boot rev 0x20200100 psci0 at mainbus0: PSCI 1.1, SMCCC 1.1 syscon0 at mainbus0: "syscon" "io-domains" at syscon0 not configured "grf-gpio" at syscon0 not configured "power-controller" at syscon0 not configured "reboot-mode" at syscon0 not configured rkclock0 at mainbus0 syscon1 at mainbus0: "syscon" "usb2-phy" at syscon1 not configured ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller" rkpinctrl0 at mainbus0: "pinctrl" rkgpio0 at rkpinctrl0 rkgpio1 at rkpinctrl0 rkgpio2 at rkpinctrl0 rkgpio3 at rkpinctrl0 "opp_table0" at mainbus0 not configured simplebus0 at mainbus0: "amba" "dmac" at simplebus0 not configured "arm-pmu" at mainbus0 not configured "display-subsystem" at mainbus0 not configured agtimer0 at mainbus0: tick rate 24000 KHz "xin24m" at mainbus0 not configured "spdif" at mainbus0 not configured com0 at mainbus0: ns16550, no working fifo com0: console rkiic0 at mainbus0 iic0 at rkiic0 rkpmic0 at iic0 addr 0x18: RK805 "spi" at mainbus0 not configured "watchdog" at mainbus0 not configured "thermal-zones" at mainbus0 not configured "tsadc" at mainbus0 not configured "efuse" at mainbus0 not configured "gpu" at mainbus0 not configured "vop" at mainbus0 not configured "iommu" at mainbus0 not configured "hdmi" at mainbus0 not configured "phy" at mainbus0 not configured dwmmc0 at mainbus0: 50 MHz base clock sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma dwmmc1 at mainbus0: 50 MHz base clock sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 "usb" at mainbus0 not configured ehci0 at mainbus0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci0 at mainbus0: version 1.0 "external-gmac-clock" at mainbus0 not configured "sdmmc-regulator" at mainbus0 not configured "vcc-host-5v-regulator" at mainbus0 not configured "vcc-host1-5v-regulator" at mainbus0 not configured "vcc-sys" at mainbus0 not configured "sound" at mainbus0 not configured "spdif-dit" at mainbus0 not configured usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable sd0: 30528MB, 512 bytes/sector, 62521344 sectors sdmmc1: can't enable card softraid0 at root scsibus1 at softraid0: 256 targets bootfile: sd0a:/bsd boot device: sd0 root on rd0a swap on rd0b dump on rd0b WARNING: preposterous clock chip time WARNING: CHECK AND RESET THE DATE! erase ^?, werase ^W, kill ^U, intr ^C, status ^T Welcome to the OpenBSD/arm64 6.6 installation program. (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s # And here the first one, that seems to be broken: U-Boot TPL 2020.01 (Jan 12 2020 - 02:16:54) LPDDR3, 800MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.01 (Jan 12 2020 - 02:16:54 -0700) Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):2.2 NOTICE: BL31: Built : 02:07:28, Jan 12 2020 ERROR: over or zero region, nr=4187432, max=10 NOTICE: BL31:Rockchip release version: v1.2 INFO: ARM GICv2 driver initialized INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing! INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2020.01 (Jan 12 2020 - 02:16:54 -0700) Model: Pine64 Rock64 DRAM: 2 GiB PMIC: RK8050 (on=0x40, off=0x00) MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 Net: eth0: ethernet@ff540000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... 33543 bytes read in 7 ms (4.6 MiB/s) Found EFI removable media binary efi/boot/bootaa64.efi Scanning disk [email protected]... ** Unrecognized filesystem type ** Card did not respond to voltage select! Scanning disk [email protected]... Disk [email protected] not ready Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 165151 bytes read in 13 ms (12.1 MiB/s) disks: sd0* >> OpenBSD/arm64 BOOTAA64 0.20 boot> cannot open sd0a:/etc/random.seed: No such file or directory booting sd0a:/bsd: 2237720+628992+8766760+742312 [181100+109+524184+202359]=0xfef680 type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8 type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8 type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8 type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8 type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8 type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8 type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8 type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8 type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8 type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8 type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8 type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8 type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008 type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8 type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8 type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8 type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8 type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008 type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8 type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8 type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008 type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.6-current (RAMDISK) #423: Sun Feb 2 02:14:44 MST 2020 [email protected]:/usr/src/sys/arch/arm64/compile/RAMDISK real mem = 2079993856 (1983MB) avail mem = 1983303680 (1891MB) mainbus0 at root: Pine64 Rock64 cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu0: 256KB 64b/line 16-way L2 cache efi0 at mainbus0: UEFI 2.8 efi0: Das U-Boot rev 0x20200100 psci0 at mainbus0: PSCI 1.1, SMCCC 1.1 syscon0 at mainbus0: "syscon" "io-domains" at syscon0 not configured "grf-gpio" at syscon0 not configured "power-controller" at syscon0 not configured "reboot-mode" at syscon0 not configured rkclock0 at mainbus0 syscon1 at mainbus0: "syscon" "usb2-phy" at syscon1 not configured ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller" rkpinctrl0 at mainbus0: "pinctrl" rkgpio0 at rkpinctrl0 rkgpio1 at rkpinctrl0 rkgpio2 at rkpinctrl0 rkgpio3 at rkpinctrl0 "opp_table0" at mainbus0 not configured simplebus0 at mainbus0: "amba" "dmac" at simplebus0 not configured "arm-pmu" at mainbus0 not configured "display-subsystem" at mainbus0 not configured agtimer0 at mainbus0: tick rate 24000 KHz "xin24m" at mainbus0 not configured "spdif" at mainbus0 not configured com0 at mainbus0: ns16550, no working fifo com0: console rkiic0 at mainbus0 iic0 at rkiic0 rkpmic0 at iic0 addr 0x18: RK805 "spi" at mainbus0 not configured "watchdog" at mainbus0 not configured "thermal-zones" at mainbus0 not configured "tsadc" at mainbus0 not configured "efuse" at mainbus0 not configured "gpu" at mainbus0 not configured "vop" at mainbus0 not configured "iommu" at mainbus0 not configured "hdmi" at mainbus0 not configured "phy" at mainbus0 not configured dwmmc0 at mainbus0: 50 MHz base clock sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma dwmmc1 at mainbus0: 50 MHz base clock sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 "usb" at mainbus0 not configured ehci0 at mainbus0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci0 at mainbus0: version 1.0 "external-gmac-clock" at mainbus0 not configured "sdmmc-regulator" at mainbus0 not configured "vcc-host-5v-regulator" at mainbus0 not configured "vcc-host1-5v-regulator" at mainbus0 not configured "vcc-sys" at mainbus0 not configured "sound" at mainbus0 not configured "spdif-dit" at mainbus0 not configured usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable sd0: 30528MB, 512 bytes/sector, 62521344 sectors sdmmc1: can't enable card softraid0 at root scsibus1 at softraid0: 256 targets bootfile: sd0a:/bsd boot device: sd0 root on rd0a swap on rd0b dump on rd0b WARNING: preposterous clock chip time WARNING: CHECK AND RESET THE DATE! init: single user shell terminated, restarting init: single user shell terminated, restarting init: single user shell terminated, restarting init: single user shell terminated, restarting
