W dniu 15.03.2024 o 13:06, Jonathan Gray pisze:
What made me wonder is that it feels like error on OpenBSD side.
7.3 release boots, 7.4 and later do not.
I tracked it down to PAC.
https://github.com/openbsd/src/commit/4171e492c627a295b38565e1f04e0b7ba62913f8
If I disable it, qemu sbsa-ref with cpu max boots.
With "-cpu max,pauth=off" I can boot OpenBSD 7.5 miniroot. So it looks like
that.
disks: sd0*
OpenBSD/arm64 BOOTAA64 1.18
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 3027864+1216160+12712936+633184 [269381+91+701664+287051]=0x1
3edb20
FACP DBG2 MCFG SPCR IORT APIC SSDT PPTT GTDT BGRT
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (RAMDISK) #123: Mon Mar 18 01:08:43 MDT 2024
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 1066147840 (1016MB)
avail mem = 992886784 (946MB)
random: boothowto does not indicate good seed
mainbus0 at root: ACPI
psci0 at mainbus0: PSCI 1.1, SMCCC 1.4
efi0 at mainbus0: UEFI 2.7
efi0: EFI Development Kit II / SbsaQemu rev 0x10000
smbios0 at efi0: SMBIOS 3.4.0
smbios0: vendor EFI Development Kit II / SbsaQemu version "1.0" date 03/13/2024
smbios0: QEMU QEMU SBSA-REF Machine
cpu0 at mainbus0 mpidr 0: Unknown, MIDR 0xf0510
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 2048KB 64b/line 16-way L2 cache
cpu0:
RNDR,TLBIOS+IRANGE,TS+AXFLAG,FHM,DP,SM4,SM3,SHA3,RDM,Atomic,CRC32,SHA2+SHA512,SHA1,AES+PMULL,SPECRES,SB,FRINTTS,LRCPC+LDAPUR,FCMA,JSCVT,DPB,ASID16,PAN+ATS1E1+EPAN,LO,HPDS,VH,HAFDBS,CS
V3,CSV2+SCXT,DIT,BT,SBSS+MSR,MTE
agintc0 at mainbus0 shift 4:3 nirq 288 nredist 4: "interrupt-controller"
agintcmsi0 at agintc0
agtimer0 at mainbus0: 62500 kHz
acpi0 at mainbus0: ACPI 6.0
acpi0: tables DSDT FACP DBG2 MCFG SPCR IORT APIC SSDT PPTT GTDT BGRT
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-255
acpiiort0 at acpi0
pluart0 at acpi0 COM0 addr 0x60000000/0x1000 irq 33
pluart0: console
ahci0 at acpi0 AHC0 addr 0x60100000/0x10000 irq 42: AHCI 1.0
ahci0: port 0: 1.5Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: port 2: 1.5Gb/sscsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, QEMU HARDDISK, 2.5+>
t10.ATA_QEMU_HARDDISK_QM00001_
sd0: 43MB, 512 bytes/sector, 88064 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, QEMU HARDDISK, 2.5+>
t10.ATA_QEMU_HARDDISK_QM00003_
sd1: 504MB, 512 bytes/sector, 1032192 sectors, thin
sd2 at scsibus0 targ 2 lun 0: <ATA, QEMU HARDDISK, 2.5+>
t10.ATA_QEMU_HARDDISK_QM00005_
sd2: 8192MB, 512 bytes/sector, 16777216 sectors, thin
xhci0 at acpi0 USB0 addr 0x60110000/0x10000 irq 43, xHCI 0.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
acpipci0 at acpi0 PCI0
pci0 at acpipci0
0:1:0: rom address conflict 0xfffc0000/0x40000
0:2:0: rom address conflict 0xffff8000/0x8000
"Red Hat Host" rev 0x00 at pci0 dev 0 function 0 not configured
em0 at pci0 dev 1 function 0 "Intel 82574L" rev 0x00: msi, address
52:54:00:12:34:56
"Bochs VGA" rev 0x02 at pci0 dev 2 function 0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Keyboard"
rev 2.00/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
uhidev1 at uhub0 port 2 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev
2.00/0.00 addr 3
uhidev1: iclass 3/0
uhid at uhidev1 not configured
uhidev2 at uhub0 port 3 configuration 1 interface 0 "QEMU QEMU USB Mouse" rev
2.00/0.00 addr 4
uhidev2: iclass 3/1
uhid at uhidev2 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
simplefb0 at mainbus0: 1280x800, 32bpp
wsdisplay0 at simplefb0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, vt100 emulation)
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.5 installation program.
