The Dockstar works fine with the Armed Slack kernel. See my message from 29.08.2010:
> OK, I've received my Seagate Freeagent Dockstar. I've flashed a new > U-Boot loader to it. A description can be found here: > http://www.plugapps.com/index.php5?title=PlugApps:Pogoplug_Setboot > http://plugapps.com/os/pogoplug/uboot/ > > The board boots fine when the kirkwood kernel is used, that comes with > the mini rootfs. Here is the cpuinfo: > > cat /proc/cpuinfo > Processor : Feroceon 88FR131 rev 1 (v5l) > BogoMIPS : 1192.75 > Features : swp half thumb fastmult edsp > CPU implementer : 0x56 > CPU architecture: 5TE > CPU variant : 0x2 > CPU part : 0x131 > CPU revision : 1 > > Hardware : Marvell SheevaPlug Reference Board > Revision : 0000 > Serial : 0000000000000000 I've installed the new U-Boot. Make sure the kernel is called uImage and the initrd is called uInitrd. Am Wednesday 15 September 2010 11:15:11 schrieb Stuart Winter: > > Recently I'm being in touch with the Seagate Dockstar which is a > > promising device based on Kirkwood Soc: > > http://xkyle.com/2010/07/19/the-seagate-dockstar-a-very-cool-linux-device > >/ > > This looks like an interesting device. > > You'll probably need to build a new > kernel to begin with patched with support for the Dockstar, because I > don't see anything about the "Dockstar" in the "kirkwood implementations" > in the Kernel armedslack ships. There might be support in linux 2.6.36, > in which case I'll add it in when I next update the kernel. > > Let us know how you get on with it. Good luck! :) > _______________________________________________ > ARMedslack mailing list > [email protected] > http://lists.armedslack.org/mailman/listinfo/armedslack -- ____________________________________________________ Dipl.-Ing. (FH) Thorsten Mühlfelder Hard- und Softwareentwicklung _______________________________________________ ARMedslack mailing list [email protected] http://lists.armedslack.org/mailman/listinfo/armedslack
