Look at the README.txt that comes with my work for hints on configuring the
featutes. Since no attachments are possible on this list all files are avalible
on rapidshare (password for zip file is armedslack!):
https://rapidshare.com/files/457383233/features.zip
I've included the leds script in the 3G.tgz because some of my scripts use it
to show that something is happening.
Activating 3G internet connection upon usb 3G dongle plugin.
This allows you to preconfigure all your 3G connections so that when you plug
in a 3G modem dongle the correct ppp connection is initiated.
I've an example of an on demand connection ti "wind Italy" operater setup.
You may like to look at the README.txt and in /etc/ppp/peers/22288 for more
info on this. This will work only if your 3G modem dongle is supported under
linux and has the correct modeswitch stuff in place.
Activating wifi dongles upon wifi dongle plugin {even in AP (Master) mode}.
Here not much was changed for the normal wifi clinet setup (just worked around
a problem) but the Master mode was added from scratch. I'll include in the
tarball hostapd which is not packaged in slackware (but since I do niot have
the sources with me right now I might forget something). Things have been
taught in a way that will let you have different AP setups each bound to a
specific hardware (mac address in the discriminator). You might like to see the
README.txt for more details and the example setup in /etc/hostapd/wlan0* and
dsnmasq.conf
Automounting usb drives.
This only works for normal partitions not lvm'd and only for filesystems that
get auto recognized by kernel (ext? and dos/vfat work fine, I've tested
personally). Things will be mounted somewhere in /media depending on vendor and
partition.
Regards
David
_______________________________________________
ARMedslack mailing list
[email protected]
http://lists.armedslack.org/mailman/listinfo/armedslack
